PCE Deutschland Force Measuring Stand PCE-HTS 50

The horizontal force measuring stand has a force range of 500 N. With a travel distance of 270 mm, tensile strengths of large or even elastic test specimens can be tested. The travel speed of the horizontal force gauge can be precisely adjusted in 1 mm/min steps between 1 ... 500 mm/min. Thus, the horizontal force gauge is used, for example, for quality testing of foils, rubber bands or ropes.

The travel speed and the travel mode of the horizontal force gauge can be set as desired. In manual mode, the horizontal force gauge only moves when the travel button is pressed. In automatic mode, this is done automatically. As soon as the clamping device has reached a limit switch, the horizontal force measuring stand stops automatically.

With the horizontal force gauge, the limit switches can be set as required. This means that the travel distance can be limited as desired. This has several advantages. The limitation can prevent the measuring device from moving into the chuck. Another advantage is that, depending on the application, the tensile length can be defined during a tensile test. In addition to the test stand, PCE Instruments also offers suitable force measurement systems that can be mounted to the horizontal force test stand. Optionally, different chucks are available for a wide range of testing tasks. Thus, a wide range of measurement tasks can be performed with a single measurement system.