zoom_in
zoom_out
fullscreen
-24%
PCE PCE-DFG NF 10K Dynamometer | Measuring range 0..10 kN / 10,000 N / 1,000 kg | Resolution 1 N
SKU: T-909945
1.533,50 € (vč. 19% daň, Bez dopravy)
1.288,66 € (bez DPH, Bez dopravy)
2.005,05 € Výrobcem doporučená malobchodní cena.
Skladem,připraveno k odeslání do 24h
doneMade in Germany
Force gauge PCE-DFG NF 10K with external load cell, USB interface and PC software
Obsah:
1 Kus
Doprava:
The shipping costs for Česká republika could not be calculated automatically.
Poskytovatel:
Prodej a dodání do ToolTeam®
Platební metody:
Vratka:
Bezpečnost:
Údaje o výrobku
Výrobce:
PCE Deutschland GmbH
Stav:
Nový
SKU:
T-909945
SKU výrobce:
PCE-DFG NF 10K
GTIN kód (EAN):
4250348719386
Hmotnost:
1,71 Kg
Všechny informace týkající se produktů od PCE Deutschland GmbH. Technické a optické úpravy výrobce a chyby vyhrazeny.
This page has been machine-translated, the original german version can be found here, please also note the Zřeknutí se odpovědnosti za překlad.
Popis výrobku
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
Související výsledky
Kompletní katalóg
Nabídka je zaměřena výhradně na firemní zákazníky, společnosti, veřejné instituce a živnostníky. Všechny ceny v katalozích jsou bez DPH, poštovného a příplatků, pokud li existují.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Výrobce je výhradně zodpovědný za obsah, cenu a detaily produktů a nabídek uvedených v katalozích. Technické a optické změny výrobce a chyby jsou vyhrazeny.
Odpovídající katalog
Nabídka komerčních zákazníků **
Návrhy produktů
-24%
PCE-DFG N 50K force gauge + external S load cell for tensile and compressive force | Resolution 0.005 kN / 5 N
PCE-DFG N 50K
1.088,45 €
Bez dopravy
1.423,10 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 5K Tension Gauge Force Gauge Memory for 100 Measurements | 0...5000 N | Resolution 1 N
PCE-DFG N 5K
964,65 €
Bez dopravy
1.261,29 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 500 digital force transducer for tensile and compressive force up to 500 N | Accuracy ±0.1% of measuring range
PCE-DFG N 500
727,10 €
Bez dopravy
950,69 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG NF 5K digital force gauge | Measuring range 0...5000 N / 500 kg | Resolution 0.5 N | Accurate ±0.5%
PCE-DFG NF 5K
1.028,35 €
Bez dopravy
1.344,59 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG NF 20K Force Gauge | Measuring range 0..20 kN / 20,000 N / 2,000 kg | Resolution 2 N
PCE-DFG NF 20K
1.533,50 €
Bez dopravy
2.005,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 20K force gauge for tensile and compressive force with very high resolution and external S load cell
PCE-DFG N 20K
1.088,45 €
Bez dopravy
1.423,10 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-MA 100 moisture meter (abs.) | 110 g | readability 1 mg/0.001 g | heating chamber for moisture determination and much more.
PCE-MA 100
1.042,00 €
Bez dopravy
1.362,45 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG NF 50K force gauge | Measuring range 0...50 kN/50,000 kg/5,000 kg | Resolution 5 N | Accuracy ±0.5%
PCE-DFG NF 50K
1.533,50 €
Bez dopravy
2.005,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG NF 2K force transducer | measuring range 0..2000 N / 200 kg | resolution 2 N | 2.8” TFT graphic display
PCE-DFG NF 2K
1.028,35 €
Bez dopravy
1.344,59 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 200 force gauge for tensile and compressive force measurement 0 to 200 N | 6 … 1600 Hz | Resolution 0.1N
PCE-DFG N 200
714,35 €
Bez dopravy
934,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
Digital Force Gauge PCE-DFG N 20 0 to 20 N|6 … 1600 Hz|Resolution 0.01 N|Measuring units N, kg, lb, Kpa
PCE-DFG N 20
714,35 €
Bez dopravy
934,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-MA 200 moisture analyzer MB 0..100% | +40.. +199 °C | 200 g | heating time 1-199 min. | readability 0.01%
PCE-MA 200
1.114,85 €
Bez dopravy
1.457,65 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 10 force gauge 0 to 10 N | including software | 1600 Hz sample rate| Exactly ±0.1% of the measuring range
PCE-DFG N 10
714,35 €
Bez dopravy
934,05 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-23%
built-in display PCE-G 2
PCE-G 2
443,55 €
Bez dopravy
574,65 € Výrobcem doporučená malobchodní cena.
Bez dopravy
-24%
PCE-DFG N 10K force gauge 0 to 10000 N | incl. PC software |6 … 1600 Hz |Exactly ±0.1% of the measuring range
PCE-DFG N 10K
1.201,30 €
Bez dopravy
1.570,69 € Výrobcem doporučená malobchodní cena.
Bez dopravy
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE PCE-DFG NF 10K Dynamometer | Measuring range 0..10 kN / 10,000 N / 1,000 kg | Resolution 1 N
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting.
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. 4250348719386-4147 4250348719386 https://www.toolteam.com/cs-CZ/pce-pce-dfg-nf-10k-dynamometer-measuring-range-0-10-kn-10-000-n-1-000-kg-resolution-1-n-t-909945-4250348719386?dc=CZ&cu=EUR 2024-11-24 1533.5 DE 14
The force gauge can operate at a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. 4250348719386-4147 4250348719386 https://www.toolteam.com/cs-CZ/pce-pce-dfg-nf-10k-dynamometer-measuring-range-0-10-kn-10-000-n-1-000-kg-resolution-1-n-t-909945-4250348719386?dc=CZ&cu=EUR 2024-11-24 1533.5 DE 14