PCE Deutschland PCE-DFG NF 50K force gauge | Measuring range 0...50 kN/50,000 kg/5,000 kg | Resolution 5 N | Accuracy ±0.5%

The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting. The force gauge can operate at a sampling rate of up to 1600 Hz.

The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.

The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.