Ganter Leveling Feet, Stainless Steel, with Internal Thread 343.5-50-M10-KRE

The static load of the leveling feet GN 343.5 is limited by the load capacity of the ball joint (AISI 303).The static load values in the table refer to a net vertical load in relation to the leveling foot. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerably reduced which must be taken into consideration.For higher loads, leveling feet GN 343.5 can be used in conjunction with screws of a higher tensile strength. Recommended are grub screws with thrust point DIN 915. The thrust point must be seated squarely at the bottom of the threaded hole, which will increase the load capacity of the ball in the socket.Leveling feet of type KSE / KRE have conductive plastic caps that prevent the build-up of electrostatic charges. The ESD conformity has been tested and confirmed as per DIN EN 61340-5-1 / DIN EN 61340-5-3.The leveling feet GN 343.5 cannot be disassembled.