zoom_in
zoom_out
fullscreen
-24%
PCE Deutschland PCE-DFG NF 50K force gauge | Measuring range 0...50 kN/50,000 kg/5,000 kg | Resolution 5 N | Accuracy ±0.5%
Artikelnummer: T-909949
1.533,50 € (inkl. 19% skat, ekskl. forsendelsesomkostninger)
1.288,66 € (ekskl. moms, ekskl. forsendelsesomkostninger)
2.005,05 € MSRP
På lager,klar til forsendelse inden for 48 timer
doneMade in Germany
Force gauge PCE-DFG NF 50K with external load cell, USB interface and PC software
Indhold:
1 Stk.
Forsendelse:
The shipping costs for Danmark could not be calculated automatically.
Udbyder:
Salg og levering før ToolTeam®
Betalingsmetoder:
Returforsendelser:
Sikkerhed:
Produktdata
Fabrikant:
PCE Deutschland GmbH
Tilstand:
Ny
Artikelnummer:
T-909949
SKU producent:
PCE-DFG NF 50K
GTIN -kode (EAN):
4250348719416
Vægt:
1,71 Kg
Alle oplysninger vedrørende produkter fra PCE Deutschland GmbH. Der tages forbehold for tekniske og optiske ændringer og fejl fra producentens side.
This page has been machine-translated, the original german version can be found here, please also note the Oversættelse Ansvarsfraskrivelse.
Produktbeskrivelse
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting. The force gauge can operate at a sampling rate of up to 1600 Hz.
The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine.
Relaterede resultater
Komplette kataloger
Tilbuddet er udelukkende rettet mod erhvervskunder, virksomheder, offentlige institutioner, håndværkere og freelancere. Alle priser i kataloger er eksklusive moms, forsendelsesomkostninger og eventuelle tillæg.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Matchende katalog
Kommercielt kundetilbud **
Produktforslag
-24%
PCE-DFG N 50K force gauge + external S load cell for tensile and compressive force | Resolution 0.005 kN / 5 N
PCE-DFG N 50K
1.088,45 €
ekskl. forsendelsesomkostninger
1.423,10 € MSRP
ekskl. forsendelsesomkostninger
-23%
built-in display PCE-G 2
PCE-G 2
443,55 €
ekskl. forsendelsesomkostninger
574,65 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG N 5K Tension Gauge Force Gauge Memory for 100 Measurements | 0...5000 N | Resolution 1 N
PCE-DFG N 5K
964,65 €
ekskl. forsendelsesomkostninger
1.261,29 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG N 500 digital force transducer for tensile and compressive force up to 500 N | Accuracy ±0.1% of measuring range
PCE-DFG N 500
727,10 €
ekskl. forsendelsesomkostninger
950,69 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG NF 5K digital force gauge | Measuring range 0...5000 N / 500 kg | Resolution 0.5 N | Accurate ±0.5%
PCE-DFG NF 5K
1.028,35 €
ekskl. forsendelsesomkostninger
1.344,59 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG NF 20K Force Gauge | Measuring range 0..20 kN / 20,000 N / 2,000 kg | Resolution 2 N
PCE-DFG NF 20K
1.533,50 €
ekskl. forsendelsesomkostninger
2.005,05 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-MA 100 moisture meter (abs.) | 110 g | readability 1 mg/0.001 g | heating chamber for moisture determination and much more.
PCE-MA 100
1.042,00 €
ekskl. forsendelsesomkostninger
1.362,45 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG N 20K force gauge for tensile and compressive force with very high resolution and external S load cell
PCE-DFG N 20K
1.088,45 €
ekskl. forsendelsesomkostninger
1.423,10 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG NF 2K force transducer | measuring range 0..2000 N / 200 kg | resolution 2 N | 2.8” TFT graphic display
PCE-DFG NF 2K
1.028,35 €
ekskl. forsendelsesomkostninger
1.344,59 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG N 200 force gauge for tensile and compressive force measurement 0 to 200 N | 6 … 1600 Hz | Resolution 0.1N
PCE-DFG N 200
714,35 €
ekskl. forsendelsesomkostninger
934,05 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG NF 10K Dynamometer | Measuring range 0..10 kN / 10,000 N / 1,000 kg | Resolution 1 N
PCE-DFG NF 10K
1.533,50 €
ekskl. forsendelsesomkostninger
2.005,05 € MSRP
ekskl. forsendelsesomkostninger
-24%
hardness tester PCE-5000
PCE-5000
5.369,75 €
ekskl. forsendelsesomkostninger
7.020,89 € MSRP
ekskl. forsendelsesomkostninger
-24%
Digital Force Gauge PCE-DFG N 20 0 to 20 N|6 … 1600 Hz|Resolution 0.01 N|Measuring units N, kg, lb, Kpa
PCE-DFG N 20
714,35 €
ekskl. forsendelsesomkostninger
934,05 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG N 10 force gauge 0 to 10 N | including software | 1600 Hz sample rate| Exactly ±0.1% of the measuring range
PCE-DFG N 10
714,35 €
ekskl. forsendelsesomkostninger
934,05 € MSRP
ekskl. forsendelsesomkostninger
-23%
Industry - Stethoscope PCE-S 42
PCE-S 42
403,10 €
ekskl. forsendelsesomkostninger
522,29 € MSRP
ekskl. forsendelsesomkostninger
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Deutschland PCE-DFG NF 50K force gauge | Measuring range 0...50 kN/50,000 kg/5,000 kg | Resolution 5 N | Accuracy ±0.5%
The force gauge with an external load cell is designed for measuring compressive forces in hard-to-reach measuring points. The load cell is connected to the force gauge by an approx. 3 m long sensor cable and thanks to the small cell dimensions it ensures versatility of use. The force gauge or load cell has several threaded holes on the bottom side, which allow a fixed mounting. The force gauge can operate at a sampling rate of up to 1600 Hz.
The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. 4250348719416-4147 4250348719416 https://www.toolteam.com/da-DK/pce-deutschland-pce-dfg-nf-50k-force-gauge-measuring-range-0-50-kn-50-000-kg-5-000-kg-resolution-5-n-accuracy-0-5-t-909949-4250348719416?dc=DK&cu=EUR 2024-11-20 1533.5 DE 14
The sampled measured values are displayed directly in the force gauge as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The PEAK Hold function allows the highest measured value to be frozen in the force gauge until this value is exceeded or deleted.
The force gauge offers the possibility to store two limit values, which are continuously compared with the momentary value. When these limit values are exceeded or fallen short of, a signal is given in the force gauge display, as well as a reaction via external interfaces, which can be used, for example, to control a testing machine. 4250348719416-4147 4250348719416 https://www.toolteam.com/da-DK/pce-deutschland-pce-dfg-nf-50k-force-gauge-measuring-range-0-50-kn-50-000-kg-5-000-kg-resolution-5-n-accuracy-0-5-t-909949-4250348719416?dc=DK&cu=EUR 2024-11-20 1533.5 DE 14