zoom_in
zoom_out
fullscreen
-23%
PCE Deutschland PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
Artikelnummer: T-909996
391,19 € (inkl. 19% skat, ekskl. forsendelsesomkostninger)
328,73 € (ekskl. moms, ekskl. forsendelsesomkostninger)
506,80 € MSRP
På lager,klar til forsendelse inden for 48 timer
Indhold:
1 Stk.
Forsendelse:
The shipping costs for Danmark could not be calculated automatically.
Udbyder:
Salg og levering før ToolTeam®
Betalingsmetoder:
Returforsendelser:
Sikkerhed:
Produktdata
Fabrikant:
PCE Deutschland GmbH
Tilstand:
Ny
Artikelnummer:
T-909996
SKU producent:
PCE-EVSE 300
GTIN -kode (EAN):
4250348727541
Vægt:
1,00 Kg
Alle oplysninger vedrørende produkter fra PCE Deutschland GmbH. Der tages forbehold for tekniske og optiske ændringer og fejl fra producentens side.
This page has been machine-translated, the original german version can be found here, please also note the Oversættelse Ansvarsfraskrivelse.
Produktbeskrivelse
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
Hinweise zur Batterieentsorgung:
Da in unseren Sendungen Batterien und Akkus enthalten sein können, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:
- Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet.
- Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und können verwertet werden.
- Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen oder in unserem Lager) unentgeltlich zurückgeben.
- Die Abgabe in Verkaufsstellen ist dabei für Endnutzer auf die übliche Mengen sowie solche Altbatterien beschränkt, die der Vertreiber als Neubatterien in seinem Sortiment führt oder geführt hat.
- Das Zeichen mit der durchgekreuzten Mülltonne bedeutet, dass Sie Batterien und Akkus nicht im Hausmüll entsorgen dürfen
Unter diesen Zeichen finden Sie zusätzlich nachstehende Symbole mit folgender Bedeutung:
- Pb = Batterie enthält mehr als 0,004 Masseprozent Blei
- Cd = Batterie enthält mehr als 0,002 Masseprozent Cadmium
- Hg = Batterie enthält mehr als 0,0005 Masseprozent Quecksilber
Relaterede resultater
Komplette kataloger
Tilbuddet er udelukkende rettet mod erhvervskunder, virksomheder, offentlige institutioner, håndværkere og freelancere. Alle priser i kataloger er eksklusive moms, forsendelsesomkostninger og eventuelle tillæg.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Produktforslag
-24%
PCE-EVSE-KIT2 EVSE measuring device for checking fixed installation. Charging stations/wall boxes, variety of functions
PCE-EVSE-KIT2
1.206,75 €
ekskl. forsendelsesomkostninger
1.577,80 € MSRP
ekskl. forsendelsesomkostninger
-24%
crane scale PCE-CSI 30
PCE-CSI 30
3.777,00 €
ekskl. forsendelsesomkostninger
4.938,39 € MSRP
ekskl. forsendelsesomkostninger
-23%
Hygrometer PCE-320
PCE-320
301,15 €
ekskl. forsendelsesomkostninger
390,20 € MSRP
ekskl. forsendelsesomkostninger
-22%
PCE-CT 25FN coating thickness gauge for ferrous & non-ferrous metals, including calibration set
PCE-CT 25FN
128,75 €
ekskl. forsendelsesomkostninger
165,29 € MSRP
ekskl. forsendelsesomkostninger
-24%
high-speed camera PCE-HSC 1660
PCE-HSC 1660
4.986,59 €
ekskl. forsendelsesomkostninger
6.519,89 € MSRP
ekskl. forsendelsesomkostninger
-23%
pH tester PCE-PH 23
PCE-PH 23
235,05 €
ekskl. forsendelsesomkostninger
304,50 € MSRP
ekskl. forsendelsesomkostninger
-23%
Anemometer PCE-WSAC 50-211
PCE-WSAC 50-211
454,55 €
ekskl. forsendelsesomkostninger
588,95 € MSRP
ekskl. forsendelsesomkostninger
-23%
differential pressure gauge PCE-P01
PCE-P01
137,69 €
ekskl. forsendelsesomkostninger
178,39 € MSRP
ekskl. forsendelsesomkostninger
-24%
force gauge PCE-PST 1 for peel tests
PCE-PST 1
3.271,89 €
ekskl. forsendelsesomkostninger
4.277,95 € MSRP
ekskl. forsendelsesomkostninger
-23%
humidity / temperature data logger PCE-THD 50
PCE-THD 50
152,35 €
ekskl. forsendelsesomkostninger
197,40 € MSRP
ekskl. forsendelsesomkostninger
-23%
moisture meter PCE-780
PCE-780
137,69 €
ekskl. forsendelsesomkostninger
178,39 € MSRP
ekskl. forsendelsesomkostninger
-22%
class II sound - calibrator PCE-SC 43
PCE-SC 43
125,05 €
ekskl. forsendelsesomkostninger
160,55 € MSRP
ekskl. forsendelsesomkostninger
-23%
differential pressure gauge PCE-PDA 10L
PCE-PDA 10L
640,10 €
ekskl. forsendelsesomkostninger
829,30 € MSRP
ekskl. forsendelsesomkostninger
-23%
digital thermometer PCE-895
PCE-895
606,10 €
ekskl. forsendelsesomkostninger
785,29 € MSRP
ekskl. forsendelsesomkostninger
-23%
precision balance PCE-BT 2000
PCE-BT 2000
436,19 €
ekskl. forsendelsesomkostninger
565,15 € MSRP
ekskl. forsendelsesomkostninger
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Deutschland PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. 4250348727541-4147 4250348727541 https://www.toolteam.com/da-DK/pce-deutschland-pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=DK&cu=EUR 2024-11-20 391.19 DE 14
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. 4250348727541-4147 4250348727541 https://www.toolteam.com/da-DK/pce-deutschland-pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=DK&cu=EUR 2024-11-20 391.19 DE 14