zoom_in
zoom_out
fullscreen
-23%
PCE Deutschland PCE-FM 200 force gauge 2 to 200N |exactly ±0.5% |unit. N + kg + lb | evaluation software | many measuring adapters
Artikelnummer: T-910000
316,79 € (inkl. 19% skat, ekskl. forsendelsesomkostninger)
266,21 € (ekskl. moms, ekskl. forsendelsesomkostninger)
410,45 € MSRP
På lager,klar til forsendelse inden for 48 timer
Indhold:
1 Stk.
Forsendelse:
The shipping costs for Danmark could not be calculated automatically.
Udbyder:
Salg og levering før ToolTeam®
Betalingsmetoder:
Returforsendelser:
Sikkerhed:
Produktdata
Fabrikant:
PCE Deutschland GmbH
Tilstand:
Ny
Artikelnummer:
T-910000
SKU producent:
PCE-FM 200
GTIN -kode (EAN):
4250348727749
Vægt:
0,90 Kg
Alle oplysninger vedrørende produkter fra PCE Deutschland GmbH. Der tages forbehold for tekniske og optiske ændringer og fejl fra producentens side.
This page has been machine-translated, the original german version can be found here, please also note the Oversættelse Ansvarsfraskrivelse.
Produktbeskrivelse
The dynamometer PCE-FM 200 is a hand-held device up to 200 N. The force gauge can determine the units N, kg and lb. In the scope of delivery of the force gauge PCE-FM 200 are different adapters, which have different shapes. These can be screwed onto the device and thus provide the optimum solution for differently shaped surfaces for compressive and tensile force measurement.
In addition to the adapters, an extension rod is also supplied, which allows measurements to be taken in places that are difficult to access. This extension rod has a length of 65 millimeters. The scope of delivery of the force gauge PCE-FM 200 includes flat head adapters, hook adapters, ball head adapters, chisel head adapters and a notch head adapter, whereby the hook adapter is used for tensile force measurements. The PCE-FM 200 force gauge offers the possibility of mounting the force gauge on a test stand by means of threads on the rear of the gauge.
Test stands are always used with a force gauge when reproducible measurement results are required for force measurement. These test stands are optimal complements to a force gauge because they are operated by an accurate hand wheel or motor. In addition, both tensile and compressive force measurements can be performed on them. Tests in the laboratory are thus possible with the force gauge, as is inspection during incoming goods inspection. Note: The internal load cell is maintenance-free, lightweight and has an extremely long service life.
Only high-quality materials are used in the manufacture of this loadcell, guaranteeing maximum safety and durability. The force gauge has an overload range. If you exceed this, then you will destroy the internal loadcell. So when selecting a force gauge for your application, move up to the next higher model for the measuring range to be on the safe side.
In addition to the adapters, an extension rod is also supplied, which allows measurements to be taken in places that are difficult to access. This extension rod has a length of 65 millimeters. The scope of delivery of the force gauge PCE-FM 200 includes flat head adapters, hook adapters, ball head adapters, chisel head adapters and a notch head adapter, whereby the hook adapter is used for tensile force measurements. The PCE-FM 200 force gauge offers the possibility of mounting the force gauge on a test stand by means of threads on the rear of the gauge.
Test stands are always used with a force gauge when reproducible measurement results are required for force measurement. These test stands are optimal complements to a force gauge because they are operated by an accurate hand wheel or motor. In addition, both tensile and compressive force measurements can be performed on them. Tests in the laboratory are thus possible with the force gauge, as is inspection during incoming goods inspection. Note: The internal load cell is maintenance-free, lightweight and has an extremely long service life.
Only high-quality materials are used in the manufacture of this loadcell, guaranteeing maximum safety and durability. The force gauge has an overload range. If you exceed this, then you will destroy the internal loadcell. So when selecting a force gauge for your application, move up to the next higher model for the measuring range to be on the safe side.
Relaterede resultater
Komplette kataloger
Tilbuddet er udelukkende rettet mod erhvervskunder, virksomheder, offentlige institutioner, håndværkere og freelancere. Alle priser i kataloger er eksklusive moms, forsendelsesomkostninger og eventuelle tillæg.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Producenten er kun ansvarlig for indhold, pris og artikeldetaljer for produkterne og tilbuddene i katalogerne. Med forbehold for tekniske og optiske ændringer og fejl fra producentens side.
Matchende katalog
Kommercielt kundetilbud **
Produktforslag
-23%
built-in display PCE-G 2
PCE-G 2
443,55 €
ekskl. forsendelsesomkostninger
574,65 € MSRP
ekskl. forsendelsesomkostninger
-23%
material test bench PCE-FTS50
PCE-FTS50
495,89 €
ekskl. forsendelsesomkostninger
642,49 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-MA 100 moisture meter (abs.) | 110 g | readability 1 mg/0.001 g | heating chamber for moisture determination and much more.
PCE-MA 100
1.042,00 €
ekskl. forsendelsesomkostninger
1.362,45 € MSRP
ekskl. forsendelsesomkostninger
-23%
anemometer PCE-AM 85
PCE-AM 85
192,79 €
ekskl. forsendelsesomkostninger
249,79 € MSRP
ekskl. forsendelsesomkostninger
-23%
Industry - Stethoscope PCE-S 42
PCE-S 42
403,10 €
ekskl. forsendelsesomkostninger
522,29 € MSRP
ekskl. forsendelsesomkostninger
-24%
Motorized force gauge PCE-MTS 500
PCE-MTS500
1.974,90 €
ekskl. forsendelsesomkostninger
2.582,19 € MSRP
ekskl. forsendelsesomkostninger
-24%
force gauge PCE-PST 1 for peel tests
PCE-PST 1
3.271,89 €
ekskl. forsendelsesomkostninger
4.277,95 € MSRP
ekskl. forsendelsesomkostninger
-24%
PCE-DFG NF 1K Force Gauge | Measuring range 0..1000 N | Resolution 0.1N | Accuracy ±0.5%
PCE-DFG NF 1K
1.028,35 €
ekskl. forsendelsesomkostninger
1.344,59 € MSRP
ekskl. forsendelsesomkostninger
-24%
force gauge PCE-PFG 2K
PCE-PFG 2K
995,60 €
ekskl. forsendelsesomkostninger
1.301,75 € MSRP
ekskl. forsendelsesomkostninger
-24%
device clamp force gauge PCE-4PCFM
PCE-4PCFM
10.462,00 €
ekskl. forsendelsesomkostninger
13.679,00 € MSRP
ekskl. forsendelsesomkostninger
-23%
force gauge PCE-PFG 500
PCE-PFG 500
482,10 €
ekskl. forsendelsesomkostninger
624,65 € MSRP
ekskl. forsendelsesomkostninger
-23%
force gauge PCE-PFG 200
PCE-PFG 200
482,10 €
ekskl. forsendelsesomkostninger
624,65 € MSRP
ekskl. forsendelsesomkostninger
-24%
ultrasonic flow meter PCE-TDS 75 for permanent installation
PCE-TDS 75
1.419,75 €
ekskl. forsendelsesomkostninger
1.856,29 € MSRP
ekskl. forsendelsesomkostninger
-23%
whiteness meter PCE-WNM 100
PCE-WNM 100
471,10 €
ekskl. forsendelsesomkostninger
610,35 € MSRP
ekskl. forsendelsesomkostninger
-23%
Anemometer PCE-WSAC 50-320
PCE-WSAC 50-320
390,25 €
ekskl. forsendelsesomkostninger
505,65 € MSRP
ekskl. forsendelsesomkostninger
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE Deutschland PCE-FM 200 force gauge 2 to 200N |exactly ±0.5% |unit. N + kg + lb | evaluation software | many measuring adapters
The dynamometer PCE-FM 200 is a hand-held device up to 200 N. The force gauge can determine the units N, kg and lb. In the scope of delivery of the force gauge PCE-FM 200 are different adapters, which have different shapes. These can be screwed onto the device and thus provide the optimum solution for differently shaped surfaces for compressive and tensile force measurement.
In addition to the adapters, an extension rod is also supplied, which allows measurements to be taken in places that are difficult to access. This extension rod has a length of 65 millimeters. The scope of delivery of the force gauge PCE-FM 200 includes flat head adapters, hook adapters, ball head adapters, chisel head adapters and a notch head adapter, whereby the hook adapter is used for tensile force measurements. The PCE-FM 200 force gauge offers the possibility of mounting the force gauge on a test stand by means of threads on the rear of the gauge.
Test stands are always used with a force gauge when reproducible measurement results are required for force measurement. These test stands are optimal complements to a force gauge because they are operated by an accurate hand wheel or motor. In addition, both tensile and compressive force measurements can be performed on them. Tests in the laboratory are thus possible with the force gauge, as is inspection during incoming goods inspection. Note: The internal load cell is maintenance-free, lightweight and has an extremely long service life.
Only high-quality materials are used in the manufacture of this loadcell, guaranteeing maximum safety and durability. The force gauge has an overload range. If you exceed this, then you will destroy the internal loadcell. So when selecting a force gauge for your application, move up to the next higher model for the measuring range to be on the safe side. 4250348727749-4147 4250348727749 https://www.toolteam.com/da-DK/pce-deutschland-pce-fm-200-force-gauge-2-to-200n-exactly-0-5-unit-n-kg-lb-evaluation-software-many-measuring-adapters-t-910000-4250348727749?dc=DK&cu=EUR 2024-11-20 316.79 DE 14
In addition to the adapters, an extension rod is also supplied, which allows measurements to be taken in places that are difficult to access. This extension rod has a length of 65 millimeters. The scope of delivery of the force gauge PCE-FM 200 includes flat head adapters, hook adapters, ball head adapters, chisel head adapters and a notch head adapter, whereby the hook adapter is used for tensile force measurements. The PCE-FM 200 force gauge offers the possibility of mounting the force gauge on a test stand by means of threads on the rear of the gauge.
Test stands are always used with a force gauge when reproducible measurement results are required for force measurement. These test stands are optimal complements to a force gauge because they are operated by an accurate hand wheel or motor. In addition, both tensile and compressive force measurements can be performed on them. Tests in the laboratory are thus possible with the force gauge, as is inspection during incoming goods inspection. Note: The internal load cell is maintenance-free, lightweight and has an extremely long service life.
Only high-quality materials are used in the manufacture of this loadcell, guaranteeing maximum safety and durability. The force gauge has an overload range. If you exceed this, then you will destroy the internal loadcell. So when selecting a force gauge for your application, move up to the next higher model for the measuring range to be on the safe side. 4250348727749-4147 4250348727749 https://www.toolteam.com/da-DK/pce-deutschland-pce-fm-200-force-gauge-2-to-200n-exactly-0-5-unit-n-kg-lb-evaluation-software-many-measuring-adapters-t-910000-4250348727749?dc=DK&cu=EUR 2024-11-20 316.79 DE 14