ELMAG MARK ADS1 adsorption dryer 12100 Thumbnail

-10%

ELMAG MARK ADS1 adsorption dryer 12100

Sku: T-491384

1.846,13 € (excl. legal VAT, excl. Shipping)

Product on backorder,
ready to ship within 14 days

Product variants

Sku:	Name:	SKU manufacturer:
T-497318	MARK adsorption dryer ADS 2	12101
T-501406	MARK adsorption dryer ADS 10	12105
T-502628	MARK adsorption dryer ADS 15	12106
T-502950	MARK adsorption dryer ADS 7	12104
T-508213	MARK adsorption dryer ADS 3	12102
T-508219	MARK adsorption dryer ADS 4	12103

Adsorptionstrockner
incl. fine filter ’C7’ and secondary filter

MARK ADS1 adsorption dryer including ‘C7’ fine filter and after-filter|ADS - Improving quality & productivity|How adsorption dryers work|> A compressor absorbs moisture from the intake air, which turns into condensation during compression. This leads to wear and corrosion on the downstream equipment, with potentially costly interruption of production and a reduction in the efficiency and service life of the equipment used.
Adsorption dryers provide a solution to prevent these negative effects.|>The MARKADS adsorption dryers eliminate water vapour that may condense in your compressed air system and cause damage. These dryers use an adsorbent material called a ’desiccant’ to absorb moisture and remove it from the compressed air (through regeneration phases). This method achieves a DTP of < 3°C (-40°C or -70°C). This value range should also be used when the ambient temperature drops below freezing to avoid the formation of ice in pipes and applications. The ADS range is typically used in the chemical, food and pharmaceutical industries and whenever a DTP adsorption of < 3°C is required< 3°C erforderlich ist.
Adsorption removes the residual moisture in the air that condenses even after a refrigeration dryer. The technology ’simulates’ a temperature drop to -40°C to -70°C by collecting and binding moisture in the desiccant medium (moisture freezes when the actual temperature falls by +3°C) and condenses the very last drop of water from the air. The moisture is removed from the airflow in the direction of your circulation and is released. Adsorption dryers are suitable for the most demanding applications, where there can be no moisture present.

Content:

1 Piece

Shipping:

The shipping costs for United Kingdom could not be calculated automatically.

Provider:

Sales and delivery by ToolTeam®

Payment methods:

PayPal, Pay upon Invoice, Credit Card, Bank Prepayment, Bank Debit

Returns:

Consumers can return the item at the specified conditions: More details

Security:

Protected by the ToolTeam Buyer Protection: More details

Product data

Manufacturer:

ELMAG

Condition:

NEW

Sku:

T-491384

SKU manufacturer:

12100

GTIN Code (EAN):

9004853121005

Weight:

13,00 Kg

All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

Applications for ADS dryers:
Chemical and pharmaceutical industry
Petrochemical industry
Food industry
Transport of hygroscopic materials
Quality paint shops
Textile production
Semi-conductors
Cable pressurisation
Beer and beverage production
Low temperature environment applications
Whenever a pressure dew point of less than +3°C is required (-40°C or -70°C)

TB 125 Vario - klein ganz groß, Ein Kompressor nimmt Feuchtigkeit aus der angesaugten Luft auf, die sich während der Komprimierung in Kondensat verwandelt. Dies führt zu Verschleiß und Korrosion an den nachgeschalteten Anlagen, mit potentiell kostspieliger Unterbrechung der Produktion und einer Verringerung der Effizienz und der Lebensdauer der eingesetzten Geräte.
Adsorptionstrockner bieten eine Lösung, um diese negativen Auswirkungen zu verhindern.
Die MARK Adsorptionstrockner ADS beseitigen Wasserdampf, der evtl. in Ihrem Druckluftsystem kondensiert und Schäden verursacht. Diese Trockner verwenden ein Adsorptionsmaterial, das „Trockenmittel“ genannt wird, um die Feuchtigkeit zu absorbieren und aus der Druckluft zu entfernen (durch Regenerationsphasen). Mit dieser Methode wird ein DTP von < 3°C (-40°C oder -70°C) erreicht. Dieser Wertebereich sollte auch verwendet werden, wenn die Umgebungstemperatur unter dem Gefrierpunkt sinkt, um die Bildung von Eis in Rohren und Anwendungen zu vermeiden. Die ADS-Palette wird in der Regel in der Chemie-, Lebensmittel- und pharmazeutischen Industrie verwendet und immer dann, wenn ein DTP von < 3°C erforderlich ist.
Adsorption entfernt die Restfeuchte in der Luft, die sogar nach einem Kältetrockner kondensiert. Die Technologie „simuliert“ eine Temperaturabsenkung auf -40°C bis -70°C durch die Sammlung und Bindung von Feuchtigkeit im Trockenmittelmedium (Feuchtigkeit gefriert bei Absenkung der Ist-Temperatur um +3°C) und kondensiert auch das letzte Wasser aus der Luft. Die Feuchtigkeit wird aus dem Luftstrom in Richtung zu Ihrem Kreislauf entfernt und abgegeben. Adsorptionstrockner sind für die anspruchsvollsten Anwendungen geeignet, bei denen gar keine Feuchtigkeit vorhanden sein darf.

Additional information

Abmessungen (mm):

281x92x445mm

C-Filter 0,01 µm 0,01 mg/m³ ():

Effektive Liefermenge (l/min):

114l/min

G-Filter 0,1 µm 0,1 mg/m³
(empfohlene Option) ():

Luftabgang (Zoll):

3/8Zoll

Max. Betriebsdruck (bar):

16bar

Standard-Taupunkt (°C):

-40°C

S-Filter 1 µm ():

Integriert im Trockner

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

ELMAG Discount News

28 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-22%

Safety and noise dampening ’safetystar’ nozzle

Straight extension, 300 mm (anodised aluminium)

Curved extension, 800 mm (aluminium anodised)

Safety and noise damper nozzle ’blowstar’ plastic

Full jet nozzle, plastic black O 2.0 mm, male M12x1.25

Damper nozzle with sintered insert, ET M12x1.25

Standard nozzle aluminium, diameter 1.5 mm, ET M12x1.25

32530

2,51 €

-18%

Air-jacket nozzle aluminium O 1.5 mm, ET M12x1.25

MARK refrigeration dryer

MARK refrigeration dryer

MARK adsorption dryer ADS 66

HSS Co5 shell end mill DIN 1880

Glass measuring rod Mod. KA 300/920

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews ELMAG MARK ADS1 adsorption dryer 12100

Applications for ADS dryers:
Chemical and pharmaceutical industry
Petrochemical industry
Food industry
Transport of hygroscopic materials
Quality paint shops
Textile production
Semi-conductors
Cable pressurisation
Beer and beverage production
Low temperature environment applications
Whenever a pressure dew point of less than +3°C is required (-40°C or -70°C)

9004853121005-642 9004853121005 https://www.toolteam.com/en-GB/elmag-mark-ads1-adsorption-dryer-12100-t-491384-9004853121005?dc=GB&cu=EUR 2024-11-17 1846.13 DE 14

Last searches

Frequent searches

All categories