zoom_in
zoom_out
fullscreen
-15%
ELMAG Metal circular saw 78026
Sku: T-508160
1.755,55 € (excl. legal VAT, excl. Shipping)
In stock,ready for shipping
doneMKS 300 RLSS-N - \ SET
doneMKS 300 RLSS-N, 40/80 rpm
doneMKS 300 RLSS-N, 40/80 rpm
Metal circular saw MKS 300 RLSS-N, 40/80 rpm|Ingenious concept for flexible production|Smooth, virtually burr-free cutting|Tailor-made sizes|TECHNICAL INFO - Zero voltage release|Application examples -|Standard features|Special accessories|MKS RLSS-N metal circular saws are an ideal solution for variable single or small series cutting of bar stock. The machines offer two speed levels for hard and soft materials. The gear head can be adjusted to a new mitre angle within seconds - thanks to a central machine mounting with quick-action angle clamp.|The precisely mounted drive axle ensures exact concentricity of the saw blade and a smooth cutting pattern. The workpiece is clamped on both sides of the interface with the double quick-action vice and cut with virtually no burrs.|MKS RLSS-N metal circular saws are available in three sizes for a cutting area of 95x55 mm, 100x70 mm or 115x70 mm. Especially interesting: SUPER SET PROMOTION.|The zero voltage trip of a machine is a safety mechanism. It prevents uncontrolled restarting of the machine drive when the power returns, e.g. after a power failure.
If the voltage drops, the start button is automatically deactivated. It must be pressed again to continue operating when the power has been restored.
Zero voltage tripping - possible causes:
- Mains power failure or shutdown
- Tripping of an upstream mains fuse
- Tripping of a motor circuit breaker
- Emergency stop button pressed
- Start button defective
- Cable break|- Metal construction
- Mechanical engineering
- Apparatus construction
- Metalworking
- Forging
- Pipeline construction
- Boiler construction
- Tank construction
- Installers
- Plumbers
- Garages
- Bodywork shops
- Construction
- Agriculture
- Vocational colleges
- Training workshops
- Home workshops|- MKS RLSS-N metal circular saw
- Bar lock with material stop
- WSS angular quick-action clamp/angle scale
- Adjustable depth stop
- DSS double quick-action vice
- Quick-release lever
- Clamping jaw(s) adjustable
- High-performance drive
- Transmission with oil bath permanent lubrication
- Cooling system with diaphragm pump
- ERGO control lever with reset
- Safety switch on the handle
- Self-closing blade guard
- Emergency stop/zero voltage tripping
- Tools/operating instructions/CE|- Universal base
- Material stand for metal circular saws
If the voltage drops, the start button is automatically deactivated. It must be pressed again to continue operating when the power has been restored.
Zero voltage tripping - possible causes:
- Mains power failure or shutdown
- Tripping of an upstream mains fuse
- Tripping of a motor circuit breaker
- Emergency stop button pressed
- Start button defective
- Cable break|- Metal construction
- Mechanical engineering
- Apparatus construction
- Metalworking
- Forging
- Pipeline construction
- Boiler construction
- Tank construction
- Installers
- Plumbers
- Garages
- Bodywork shops
- Construction
- Agriculture
- Vocational colleges
- Training workshops
- Home workshops|- MKS RLSS-N metal circular saw
- Bar lock with material stop
- WSS angular quick-action clamp/angle scale
- Adjustable depth stop
- DSS double quick-action vice
- Quick-release lever
- Clamping jaw(s) adjustable
- High-performance drive
- Transmission with oil bath permanent lubrication
- Cooling system with diaphragm pump
- ERGO control lever with reset
- Safety switch on the handle
- Self-closing blade guard
- Emergency stop/zero voltage tripping
- Tools/operating instructions/CE|- Universal base
- Material stand for metal circular saws
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
ELMAG
Condition:
NEW
Sku:
T-508160
SKU manufacturer:
78026
GTIN Code (EAN):
9004853780264
Weight:
98,00 Kg
All information relating to products from ELMAG. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
- High accuracy in series cutting - with bar lock and material stop
- Fast mitre adjustment with lever handle - with quick-action angle clamp and angular scale 45-0-45°
- Flexible mitre adjustment - gear head and/or vice swivel mounted
- Cutting depth can be limited precisely - with depth stop
- Powerful - two-level drive motor 40/80 rpm
- Smooth running and durable - quality gearbox with oil bath for permanent lubrication
- Optimum cooling - coolant circuit system with diaphragm pump, dosing valve and return filter
- Compact - coolant tank integrated in chip tray
- Stable cutting guide - with ERGO operating lever
- Safe - self-closing saw blade guard, permanent switch, emergency stop, zero voltage release, CE-compliant
- TB 125 Vario - klein ganz groß, MKS RLSS-N Metallkreissägen sind eine ideale Lösung für den variablen Einzel- oder Kleinserienschnitt von Stangenmaterial. Die Maschinen bieten zwei Drehzahlstufen für harte und weiche Werkstoffe. Der Getriebekopf ist innerhalb von Sekunden auf einen neuen Gehrungswinkel einstellbar - dank einer zentral angeordneten Maschinenlagerung mit Winkelschnellspanner.
- Die präzise gelagerte Antriebsachse sorgt für einen präzisen Rundlauf des Sägeblattes und für ein glattes Schnittbild. Das Werkstück wird mit dem Doppel-Schnellspannschraubstock an beiden Seiten der Schnittstelle gespannt und nahezu gratfrei druchgeschnitten.
- MKS RLSS-N Metallkreissägen sind in drei Baugrößen für einen Schnittbereich von 95x55 mm, 100x70 mm oder 115x70 mm lieferbar. Besonders interessant: SUPER-SET-AKTION.
- Die Nullspannungsauslösung einer Maschine ist ein Sicherheitsmechanismus. Er verhindert das unkontrollierte Wiederanlaufen des Maschinenantriebs bei Stromwiederkehr, z.B. nach einem Stromausfall.
Bei Spannungsabfall wird der Starttaster automatisch deaktiviert. Er muss für den Weiterbetrieb nach Strom-wiederkehr erneut betätigt werden.
Nullspannungsauslösung - Mögliche Ursachen:
- Netzstromausfall oder -abschaltung
- Ansprechen einer vorgeschalteten Netzstromsicherung
- Ansprechen eines Motorschutzschalters
- Not-Aus-Taster betätigt
- Starttaster defekt
- Kabelbruch - - Metallbau
- Maschinenbau
- Gerätebau
- Schlossereien
- Schmieden
- Rohrleitungsbau
- Kesselbau
- Behälterbau
- Installateure
- Spenglereien
- KFZ-Werkstätten
- Karosseriebau
- Baugewerbe
- Landwirtschaft
- Berufsschulen
- Lehrwerkstätten
- Heimwerkstätten - - MKS RLSS-N Metall-Kreissägemaschine
- Stangensperre mit Materialanschlag
- WSS Winkelschnellspanner/Winkelskala
- Schnitttiefenanschlag verstellbar
- DSS Doppel-Schnellspannschraubstock
- Schnellspannhebel
- Spannbacke(n) verstellbar
- Hochleistungsantrieb
- Getriebe mit Ölbad-Dauerschmierung
- Kühlsystem mit Membranpumpe
- ERGO Bedienhebel mit Rückstellung
- Sicherheits-Dauerschalter am Handgriff
- Sägeblattschutz selbstschließend
- Not-Aus/Nullspannungsauslösung
- Werkzeug/Betriebsanleitung/CE - - Universalsockel
- Materialständer für Metallkreissägen
Additional information
Breite (mm):
1.000mm
Vierkantrohr Schnittbereich bei 45° rechtsgerichtete Gehrung (mm):
Max. 70mm
Drehzahlstufe 1 / 2 (UpM):
40 / 80UpM
Einlaufhöhe für Rollbahnen (mm):
1.010mm
Höhe (mm):
1.150mm
Länge (mm):
1.475mm
Motorleistung Drehzahlstufe 1 / 2 (W):
1.100 / 1.500W
Netzanschluss (V/Hz):
400 / 50-60V/Hz
Rechteckrohr Schnittbereich bei 0° (mm):
Max. 100x70mm
Rundrohr Schnittbereich bei 0° (mm):
Max. 80mm
Rundrohr Schnittbereich bei 45° rechtsgerichtete Gehrung (mm):
Max. 80mm
Sägeblatt-Außendurchmesser (mm):
300mm
Sägeblatt-Innendurchmesser (mm):
32mm
Schnittwinkel:
45-0-45°
Schraubstockspannweite max. (mm):
105mm
Rechteckrohr Schnittbereich bei 45° rechtsgerichtete Gehrung (mm):
Max. 80x70mm
Vierkantrohr Schnittbereich bei 0° (mm):
Max. 80mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-14%
Sheet steel base for
78098
476,38 €
-33%
Saw blade HSS / DMo5
78214
117,94 €
175,00 € MSRP
-14%
Universal base suitable for
78096
494,66 €
-15%
Metal circular saw
78027
2.605,00 €
-15%
Metal circular saw machine - SUPER SET PROMOTION
78021
2.344,50 €
-15%
Metal circular saw machine - SUPER SET PROMOTION
78022
3.086,34 €
-16%
Metal circular saw
78025
1.529,03 €
-15%
Metal circular saw machine - SUPER SET PROMOTION
78020
2.146,30 €
-10%
ALUMINIUM metal circular saw
78050
2.916,47 €
-9%
Metal circular saw
78071
8.522,86 €
-10%
Metal circular saw
78046
4.632,39 €
-9%
Metal circular saw
78075
11.462,02 €
-9%
Metal circular saw
78039
7.180,76 €
-9%
ALUMINIUM metal circular saw
78053
18.631,43 €
-9%
Metal circular saw
78033
2.825,87 €
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
ELMAG Metal circular saw 78026
- High accuracy in series cutting - with bar lock and material stop
- Fast mitre adjustment with lever handle - with quick-action angle clamp and angular scale 45-0-45°
- Flexible mitre adjustment - gear head and/or vice swivel mounted
- Cutting depth can be limited precisely - with depth stop
- Powerful - two-level drive motor 40/80 rpm
- Smooth running and durable - quality gearbox with oil bath for permanent lubrication
- Optimum cooling - coolant circuit system with diaphragm pump, dosing valve and return filter
- Compact - coolant tank integrated in chip tray
- Stable cutting guide - with ERGO operating lever
- Safe - self-closing saw blade guard, permanent switch, emergency stop, zero voltage release, CE-compliant