Eurotec Rock hexagonal - galvanised steel - SW17 - 12.5 x 60 mm 110336
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-363757 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 100 mm | 110327 | ||
T-363758 | Rock hexagonal - steel galvanised - SW17 - 12,5 x 120 mm | 110328 | ||
T-363759 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 140 mm | 110329 | ||
T-363760 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 160 mm | 110330 | ||
T-363761 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 180 mm | 110331 | ||
T-363762 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 200 mm | 110332 | ||
T-363763 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 240 mm | 110333 | ||
T-363764 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 280 mm | 110334 | ||
T-363765 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 320 mm | 110335 | ||
T-363767 | Rock hexagonal - galvanised steel - SW17 - 12.5 x 80 mm | 110337 | ||
T-363768 | Rock hexagonal - galvanised steel - SW13 - 7.5 x 40 mm | 110338 | ||
T-363769 | Rock hexagonal - galvanised steel - SW13 - 7.5 x 50 mm | 110339 | ||
T-363770 | Rock hexagonal - galvanised steel - SW13 - 7.5 x 60 mm | 110340 | ||
T-363771 | Rock hexagonal - galvanised steel - SW13 - 7.5 x 80 mm | 110341 | ||
T-363772 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 60 mm | 110342 | ||
T-363773 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 80 mm | 110343 | ||
T-363774 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 100 mm | 110344 | ||
T-363775 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 120 mm | 110345 | ||
T-363776 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 140 mm | 110346 | ||
T-363777 | Rock hexagonal - galvanised steel - SW15 - 10.5 x 160 mm | 110347 |
Product data
Product description
A practical alternative to the classic anchor
Our Eurotec Rock concrete screw is suitable for cracked and non-cracked concrete (normal concrete C20/25 to C50/60). A European Technical Assessment for these anchors is available. The concrete screw is screwed directly into the drill hole, no further components are required. The thread cuts a counter-thread into the substrate as it is screwed in. This type of fixing is simple, time-saving and cost-effective. The rock concrete screw also works reliably in high-strength concrete of class C50/60. A special thread, high-strength screw steel and a complex hardening process guarantee a good hold.
Advantages and properties
- No additional components required for installation
- High pull-out values
- Low edge and centre distances possible thanks to low splitting effect
- Many application options thanks to various diameters and screw heads
- Time-saving and cost-effective installation
- Setting and installation process takes place in a single work step. and installation process takes place in a single work step
Instructions
- Drill hole creation by hammer drilling
- Setting parameters must be adhered to
- Only suitable for use in normal concrete C20/25 to C50/60
Additional information
Related results
Complete catalogs
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Product suggestions
A practical alternative to the classic anchor
Our Eurotec Rock concrete screw is suitable for cracked and non-cracked concrete (normal concrete C20/25 to C50/60). A European Technical Assessment for these anchors is available. The concrete screw is screwed directly into the drill hole, no further components are required. The thread cuts a counter-thread into the substrate as it is screwed in. This type of fixing is simple, time-saving and cost-effective. The rock concrete screw also works reliably in high-strength concrete of class C50/60. A special thread, high-strength screw steel and a complex hardening process guarantee a good hold.
Advantages and properties
- No additional components required for installation
- High pull-out values
- Low edge and centre distances possible thanks to low splitting effect
- Many application options thanks to various diameters and screw heads
- Time-saving and cost-effective installation
- Setting and installation process takes place in a single work step. and installation process takes place in a single work step
Instructions
- Drill hole creation by hammer drilling
- Setting parameters must be adhered to
- Only suitable for use in normal concrete C20/25 to C50/60