zoom_in
zoom_out
fullscreen
HEUER-SPANN clamping tower incl. adapters for 14 mm T-slot 213014
Sku: T-555
Discontinued item
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-554 | HEUER-SPANN clamping tower incl. adapters for 12 mm T-slot | 213012 | |
|
T-6988 | HEUER-SPANN tensioning tower incl. adapters for 16mm T-slot | 213016 | |
|
T-6989 | Tensioning tower HEUER-SPANN incl. adapters for 18mm T-slot | 213018 |
doneincluding 14mm adapter set
donePrecise and quick alignment
donePrecise and quick alignment
doneComfortable aligned clamping
doneComfortable aligned clamping
doneComfortable aligned clamping
donePlane parallelism: 0.02 mm
HEUER clamping - fast, right-angled, simple
Product data
Manufacturer:
Brockhaus HEUER GmbH
Condition:
NEW
Sku:
T-555
SKU manufacturer:
213014
GTIN Code (EAN):
4010898213143
Weight:
1,83 Kg
All information relating to products from Brockhaus HEUER GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
One HEUER clamp including 14mm adapter set (adapter set consisting of two dowel pins and one T-slot nut) suitable for machine tables with 14mm T-slot.
A minimum of three HEUER clamps are required. Each additional adapter is used for better clamping of the workpiece.
The respective HEUER clamping adapters are exchanged for use on different machine table sizes. Additional adapter sets are available in the sizes: 12, 14, 16, 18 mm.
The possible clamping height is virtually unlimited thanks to the use of longer screws.The screws supplied allow clamping of material thicknesses from 4 - 45 mm.
The HEUER clamp is the ultimate helper in mould, tool and machine construction as well as for maintenance departments.
It is the perfect tool for light to medium machining applications. Particularly suitable for fixing flat semi-finished products that are too large for a machine vice. Without re-alignment. Fast and precise.
Advantage 1:
The workpiece is quickly and precisely aligned parallel to the axis or grooves of the machine table without the need for time-consuming alignment work. This is because the HEUER clamping device always sits parallel in the grooves of the machine table with two guide pins (register pins)! This makes right-angled clamping possible.
Advantage 2:
The free space between the semi-finished product and the machine table means that drilling, free milling and openings are no problem. Except for a few places, the semi-finished products can be machined over their entire surface. Even larger semi-finished products can be clamped and machined easily, conveniently and quickly aligned by using several HEUER clamps.
Advantage 3:
Multiple workpieces of the same type can be clamped identically without realigning, as only the clamping head is released. The stop position remains unchanged. By using the HEUER clamping system, an enormous time advantage is achieved compared to conventional clamping methods.
A minimum of three HEUER clamps are required. Each additional adapter is used for better clamping of the workpiece.
The respective HEUER clamping adapters are exchanged for use on different machine table sizes. Additional adapter sets are available in the sizes: 12, 14, 16, 18 mm.
The possible clamping height is virtually unlimited thanks to the use of longer screws.The screws supplied allow clamping of material thicknesses from 4 - 45 mm.
The HEUER clamp is the ultimate helper in mould, tool and machine construction as well as for maintenance departments.
It is the perfect tool for light to medium machining applications. Particularly suitable for fixing flat semi-finished products that are too large for a machine vice. Without re-alignment. Fast and precise.
Advantage 1:
The workpiece is quickly and precisely aligned parallel to the axis or grooves of the machine table without the need for time-consuming alignment work. This is because the HEUER clamping device always sits parallel in the grooves of the machine table with two guide pins (register pins)! This makes right-angled clamping possible.
Advantage 2:
The free space between the semi-finished product and the machine table means that drilling, free milling and openings are no problem. Except for a few places, the semi-finished products can be machined over their entire surface. Even larger semi-finished products can be clamped and machined easily, conveniently and quickly aligned by using several HEUER clamps.
Advantage 3:
Multiple workpieces of the same type can be clamped identically without realigning, as only the clamping head is released. The stop position remains unchanged. By using the HEUER clamping system, an enormous time advantage is achieved compared to conventional clamping methods.
Additional information
Nutbreite:
14mm
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-29%
HEUER-Stand-Lift for HEUER bench vice size 120mm
117120
225,42 €
315,71 € MSRP
-26%
HEUER Compact bench vice
118001
141,39 €
192,31 € MSRP
-20%
Table Clamb for HEUER bench vice size 120mm
119120
57,13 €
71,00 € MSRP
-29%
HEUER bench vice size 180mm
100180
320,38 €
448,74 € MSRP
-18%
Protective jaws Type F for bench vice size 120mm
111120
30,80 €
(18,33 € / Piece)
37,35 € MSRP
-20%
Replaceable jaws for HEUER bench vice size 160mm
116160
37,10 €
46,09 € MSRP
-29%
HEUER bench vice size 160mm with Replaceable jaws
101160
366,26 €
513,02 € MSRP
-19%
Protective jaws Type G for bench vice size 140mm
112140
31,59 €
(18,80 € / Piece)
39,24 € MSRP
-19%
Protective jaws Type Fi for bench vice size 160mm
113160
38,11 €
(22,68 € / Piece)
47,31 € MSRP
-25%
Protective jaw-Set for bench vice size 160mm
115160
99,20 €
131,76 € MSRP
-19%
Protective jaws Type P for bench vice size 180mm
109180
36,80 €
(21,90 € / Piece)
45,71 € MSRP
-27%
HEUER Lift for HEUER bench vice size 140mm
104240
160,29 €
218,32 € MSRP
-25%
Protective jaw set size 120, contains protective jaws type N, G and PP
115122
67,52 €
89,66 € MSRP
-22%
Protective jaws Type PP for HEUER Compact bench vice
108120-Compact
24,54 €
(14,60 € / Piece)
31,47 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
HEUER-SPANN clamping tower incl. adapters for 14 mm T-slot 213014
One HEUER clamp including 14mm adapter set (adapter set consisting of two dowel pins and one T-slot nut) suitable for machine tables with 14mm T-slot.
A minimum of three HEUER clamps are required. Each additional adapter is used for better clamping of the workpiece.
The respective HEUER clamping adapters are exchanged for use on different machine table sizes. Additional adapter sets are available in the sizes: 12, 14, 16, 18 mm.
The possible clamping height is virtually unlimited thanks to the use of longer screws.The screws supplied allow clamping of material thicknesses from 4 - 45 mm.
The HEUER clamp is the ultimate helper in mould, tool and machine construction as well as for maintenance departments.
It is the perfect tool for light to medium machining applications. Particularly suitable for fixing flat semi-finished products that are too large for a machine vice. Without re-alignment. Fast and precise.
Advantage 1:
The workpiece is quickly and precisely aligned parallel to the axis or grooves of the machine table without the need for time-consuming alignment work. This is because the HEUER clamping device always sits parallel in the grooves of the machine table with two guide pins (register pins)! This makes right-angled clamping possible.
Advantage 2:
The free space between the semi-finished product and the machine table means that drilling, free milling and openings are no problem. Except for a few places, the semi-finished products can be machined over their entire surface. Even larger semi-finished products can be clamped and machined easily, conveniently and quickly aligned by using several HEUER clamps.
Advantage 3:
Multiple workpieces of the same type can be clamped identically without realigning, as only the clamping head is released. The stop position remains unchanged. By using the HEUER clamping system, an enormous time advantage is achieved compared to conventional clamping methods.
4010898213143-1 4010898213143 https://www.toolteam.com/en-GB/heuer-spann-clamping-tower-incl-adapters-for-14-mm-t-slot-213014-t-555-4010898213143.html?dc=GB&cu=EUR 2024-09-26 0 DE 14
A minimum of three HEUER clamps are required. Each additional adapter is used for better clamping of the workpiece.
The respective HEUER clamping adapters are exchanged for use on different machine table sizes. Additional adapter sets are available in the sizes: 12, 14, 16, 18 mm.
The possible clamping height is virtually unlimited thanks to the use of longer screws.The screws supplied allow clamping of material thicknesses from 4 - 45 mm.
The HEUER clamp is the ultimate helper in mould, tool and machine construction as well as for maintenance departments.
It is the perfect tool for light to medium machining applications. Particularly suitable for fixing flat semi-finished products that are too large for a machine vice. Without re-alignment. Fast and precise.
Advantage 1:
The workpiece is quickly and precisely aligned parallel to the axis or grooves of the machine table without the need for time-consuming alignment work. This is because the HEUER clamping device always sits parallel in the grooves of the machine table with two guide pins (register pins)! This makes right-angled clamping possible.
Advantage 2:
The free space between the semi-finished product and the machine table means that drilling, free milling and openings are no problem. Except for a few places, the semi-finished products can be machined over their entire surface. Even larger semi-finished products can be clamped and machined easily, conveniently and quickly aligned by using several HEUER clamps.
Advantage 3:
Multiple workpieces of the same type can be clamped identically without realigning, as only the clamping head is released. The stop position remains unchanged. By using the HEUER clamping system, an enormous time advantage is achieved compared to conventional clamping methods.
4010898213143-1 4010898213143 https://www.toolteam.com/en-GB/heuer-spann-clamping-tower-incl-adapters-for-14-mm-t-slot-213014-t-555-4010898213143.html?dc=GB&cu=EUR 2024-09-26 0 DE 14