PCE Deutschland anemometer PCE-WSAC 50-110

The wind warning device can be used in different fields of application. In the application, the wind meter performs measurements from the smallest wind movements. On the one hand, the wind warning device can be used for monitoring the instantaneous wind speed. On the other hand, there is also the possibility to use the wind meter for the average value measurement of the last two or five minutes. xIf the values of the wind speed should be higher than the preset values, a pre-alarm is switched on first before the alarm is issued. Both alarms are issued visually and acoustically on the wind warning device. If the pre-alarm takes effect, a yellow LED will flash on the front of the device and a beeper will emit a periodic warning tone. If the normal alarm needs to be activated, the red LED will flash and the beeper will be played continuously by the device. Generally, the wind warning device is used wherever wind monitoring needs to be done. This is often the case in factories, mines, wind turbines and the like. If required, a relay can also be connected to the wind meter. Besides the low wind speeds, the wind meter is characterized by its high reliability and high accuracy.