PCE Deutschland particle counter PCE-MPC 25 | indicative measurement | data logger | max. (=) 1000 µg/m³ | mass concentration

The particle counter is used in offices, workshops or also in laboratories to carry out orienting measurements of the ambient conditions. In addition to the number of particles, the particle counter determines the mass concentration PM2.5 and PM10 in the measuring range 0 ... 1000 µg/m³. In addition, the temperature and ambient humidity are measured. With the alarm limit function, limit values for PM2.5 can be set for the particle counter.

During a measurement it is possible to record the measured values with the particle counter. For this purpose, a memory with a storage capacity of approx. 12 measurement runs with 999 measurement points each is available for the particle counter. The interval of the particle counter can be set in different times.

The 8 Wh battery can be charged via the Micro USB interface. The battery used for the particle counter allows an operating time of approx. 9 hours. Thus, the particle counter can perform measurements over an entire working day before it must be recharged. Since the battery is not permanently installed in the particle counter, it can be easily replaced.

If you have further questions about the particle counter PCE-MPC 15 / PCE-MPC 25, please have a look at the following technical data or use our contact form. Our technicians and engineers will be very happy to advise you regarding particle counters or any other products in the field of control technology, laboratory technology, measuring instruments or scales of PCE Deutschland GmbH.