REMS Power Press ACC 577010 R220

Electro-hydraulic radial press with forced run-off for the production of press connections depending on the system from diam. 10 - 108 (110) mm, diam. 3/8 - 4”. For driving REMS pressing tongs/pressing rings and suitable pressing tongs/pressing rings from other manufacturers. Rotatable pressing tong holder with automatic locking. Electro-hydraulic drive with proven universal motor 230 V, 50 - 60 Hz, 450 W, robust planetary gear, eccentric piston pump and compact high-performance hydraulic system, safety tip switch. In a sturdy sheet steel box.”



Action set consisting of: REMS Power-Press ACC Basic-Pack (577010 R220), including crimping pliers V 15-18-22
Pipe shears for plastic and composite pipes. With blade. In blister packaging.
”Hand-held threading die with quick-change die heads. For pipe threads 1/8 - 2”, 16 - 50 mm, bolt threads 6 - 30 mm, 1/4 - 1”. For right-hand and left-hand threads. 1 ratchet lever for the entire cutting range. Quick-change die heads with dies for tapered pipe threads ISO 7-1, EN 10226 (DIN 2999, BSPT) R right or for threads for electrical conduits in accordance with EN 60423 M. In a sturdy sheet steel box or in a cardboard box.”
REMS Blitz. Turbo gas soldering torch propane for soft soldering of copper pipes small diameter35 mm. Piezo-electric self-ignition. Gas connection G 3/8 LH.
Laser-welded, high-temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
Laser-welded, high temperature resistant. Universally applicable for dry and wet drilling, hand-held or with drill stand. For many materials, e.g. concrete, reinforced concrete, all types of masonry, natural stone, asphalt, all types of screed. Connection thread UNC 11/4 inside. Drilling depth 420 mm. In box.
REMS pressing pliers with 2 swivelling monobloc pressing jaws. Best-selling standard version.
REMS crimping pliers Mini with 2 swivelling monoblock crimping jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
REMS pressing tongs Mini with 2 swivelling monoblock pressing jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
REMS pressing tongs Mini with 2 swivelling monoblock pressing jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
REMS pressing tongs Mini with 2 swivelling monoblock pressing jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
REMS pressing tongs Mini with 2 swivelling monoblock pressing jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
Cutting pliers with 1 pair of reversible cutting inserts for steel, stainless steel, M 6 - M 12. In box.
REMS pressing pliers with 2 swivelling monobloc pressing jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc crimping jaws.
REMS crimping pliers with 2 swivelling monobloc crimping jaws. Best-selling standard version.
REMS crimping pliers with 2 swivelling monobloc jaws. Best-selling standard version.
REMS Mini crimping pliers with 2 swivelling monobloc crimping jaws. Particularly compact design and low weight of the REMS pressing tongs Mini due to special arrangement of the pressing tongs connection (patent EP 1 952 948). Recesses embedded in the pressing jaws for secure guidance of the connecting lugs for offset-free pressing (patent EP 2 347 862).
REMS pressing tongs with 2 swivelling monoblock pressing jaws. Best-selling standard version.
for all sawing work
for all sawing work
for all sawing work
”Steel pipes max. 4”
for composite pipes



Specially hardened cutting wheel made of proven, tough REMS cutting jaw steel ensures a long service life. Cutting wheel protected from contact with the counter-pressure rollers by limiting the feed movement.




Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes, with integrated pipe deburrer. With cutting wheel. In blister packaging.
Guide glove nailed left, for REMS Cobra 22
Guide glove nailed right, for REMS Cobra 22
Dm. X length 8 mm x 7.5 m for REMS Mini Cobra , REMS Mini Cobra A and REMS Cobra 22 in conjunction with adapter drum
R-spiral Dm 16 mm x 2.3 m, for REMS Cobra 22
Tube cleaning spiral Dm 22 mm x 4.5 m, for REMS Cobra 22





































































































































































für Fine filter with fine filter insert 90 Micro- m

















































for connection of 2 suction / pressure hoses and for blowing out the suction / pressure hoses.










































for pressure and leak testing of pipework systems and tanks up to 250 hPa/ 250 mbar/3, 6 psi. CL 1, 6












































































































































































































Accessories for REMS Hurrican

Accessories for REMS Amigo 2 Set (540030 R110G)
Accessories for REMS Amigo 2 Set (540030 R110G)
for fixing the tool holder
Accessories for REMS drill rigs Simplex and Duplex
Accessories for REMS Simplex and Duplex drill rigs
Accessories for core drilling technology
For diamond core drill bits
Accessories for REMS Simplex and Duplex drill rigs
Accessories for REMS Simplex and Duplex drill rigs
Accessories for REMS Simplex and Duplex drill rigs
For fast spraying Set 160 / 500
For quick spud set 160
For quick spud set 160 / 500
For quick spud set 160 / 500 Set 160 / 500
Accessories for REMS Simplex and Duplex drill rigs
Accessories for REMS Simplex and Duplex drill rigs
Sharpening stone for REMS UDKB and TDKB
Accessories for REMS Simplex and Duplex drill rigs

Accessories for REMS Simplex and Duplex drill rigs

Accessories for REMS Simplex and Duplex drill rigs

Accessories for REMS Simplex and Duplex



























































































































































































































to check the concentration of the disinfectant solution.
to check that the disinfectant solution has been completely rinsed out after disinfection.

















Universally applicable for tapping machines and tapping clamps of all types. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Universally applicable for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.

Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.




Can be used universally for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.
Universally applicable for all types of tapping machines and tapping heads. For opening and non-opening die heads. Advantageous accessory for REMS Amigo E, REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS eva and other makes.
For threading machines with opening die head: tube turning machines, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.



For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.

For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.

For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.

For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.


For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.

For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.
For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.
For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.



For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.

For threading machines with opening die head: Tube lathes, machines with rotating die head, threading devices. Automatic quick clamping and centring of the pipe section. Without tools. Automatic unclamping after completion of the nipple. Nipple production possible without removing the nipple fi x from the clamping device.
Pipe cutter for steel pipes. With cutting wheel. In box.

Pipe cutter for steel pipes. With cutting wheel. In box.




Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister packaging.

Specially hardened cutting wheel made of proven, tough REMS cutting jaw steel ensures a long service life. Cutting wheel protected from contact with the counter-pressure rollers by limiting the feed movement.

Specially hardened cutting wheel made of proven, tough REMS cutting jaw steel ensures a long service life. Cutting wheel protected from contact with the counter-pressure rollers by limiting the feed movement.
Specially hardened cutting wheel made of proven, tough REMS cutting jaw steel ensures a long service life. Cutting wheel protected from contact with the counter-pressure rollers by limiting the infeed movement.

Specially hardened cutting wheel made of proven, tough REMS cutting jaw steel ensures a long service life. Cutting wheel protected from contact with the counter-pressure rollers by limiting the feed movement.
Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister packaging.
Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister packaging.

Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister pack/box.
Pipe cutter for copper pipes, with integrated pipe deburrer. With cutting wheel. In blister packaging.

Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes, with integrated pipe deburrer. With cutting wheel. In blister packaging.
Pipe cutter for copper pipes, with integrated pipe deburrer. With cutting wheel. In blister packaging.


Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes, with integrated pipe deburrer. With cutting wheel. In blister packaging.

For REMS RAS
For REMS REG Universal
Pipe cutter for copper pipes. With cutting wheel. In blister packaging/box.
Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister pack/box.




Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister packaging/box.
Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister pack/box.


Pipe cutter for copper pipes. With cutting wheel. In blister packaging/box.






Pipe cutter for copper pipes, thin-walled stainless steel pipes, thin-walled steel, aluminium and brass pipes. With cutting wheel. In blister pack/box.
”External/internal pipe deburrer for manual operation or electric drive. For stainless steel pipes, other steel pipes, copper, brass, aluminium, plastic pipes, dm. 10 - 42 mm, dm. 1/2 - 1 5/8”. Without driver for electric drive. In blister pack.”
REMS metal driver for REMS REG 10-42
”External/internal pipe deburrer. For stainless steel pipes, other steel pipes, copper, brass, aluminium, plastic pipes, dm. 8 - 35 mm, dm. 3/8 - 1 3/8”. In blister packaging.”
”Outer/inner pipe deburrer. For stainless steel pipes, other steel pipes, copper, brass, aluminium, plastic pipes, dm. 10 - 54 mm, dm. 1/2 - 2 1/8”. In blister pack.”
”External/internal pipe deburrer for manual operation or electric drive. For stainless steel pipes, other steel pipes, copper, brass, aluminium, plastic pipes, dm. 10 - 54 mm, dm. 1/2 - 2 1/8”. In blister pack.”
”Internal pipe deburrer for pipes dm. 28 - 108 mm, dm. 3/4 - 4”, for electric drive with the pipe cutting machine REMS Cento, REMS Akku-Cento 22 V (with REMS cutting wheel art. no. 845050 or 845053).”
REMS REG 28 - 108
”External/internal pipe deburrer. For copper, brass, aluminium, steel and plastic pipes, dm. 3 - 35 mm, dm. 1/8 - 1 3/8”. In blister packaging.”
Universal deburrer. For copper, steel, brass, aluminium, plastic. On cardboard box.
”Manual pressure test pump with pressure gauge, p max. 6 MPa/60 bar/870 psi, for pressure and leak testing of pipework systems and containers up to 6 MPa/60 bar/870 psi. Corrosion-resistant, powder-coated sheet steel container for 12 litre capacity. 1.5 m high-pressure hose with 1/2” connection. In box.”
”Manual pressure test pump with pressure gauge, p max. 6 MPa/60 bar/870 psi, for pressure and leak testing of pipework systems and containers up to 6 MPa/60 bar/870 psi. Stainless steel tank for 12 litre capacity. 1.5 m high-pressure hose with 1/2” connection. In box.”

















to REMS Push


for pressure and leak testing of pipework systems and containers up to 1.6 MPa/ 16 bar/232 psi. CL 1.0.
for REMS Push











connection piece with pressure gauge and shut-off valve for REMS Push and REMS Push INOX.



























For pressure and leak testing of pipework systems and tanks up to 6 MPa/60 bar/870 psi.
















Accessories for REMS Solar-Push
Accessories for REMS Solar-Push
REMS plastic container complete, Capacity 30 litres for Sola-Push
for Solar-Push K 60
for REMS Solar-Push
”consisting of screw cap with return connection for return line with 3/4” connection, adapter, 1 fine filter bag 70 micro-m, for flushing floor/wall surface heating systems and for removing sludge. ”
For fine filters with fine filter bag 70 Micro-m







”Electric filling and flushing unit for quick and easy filling, flushing and venting of closed systems. Max. flow rate 27 l/min, tank volume 30 litres. With impeller pump, temperature-resistant for continuous load max. 80°C. Delivery pressure max. 0.65 MPa/6.5 bar/94 psi. Condenser motor 230 V, 50 Hz, 1000 W. Pressure relief valve. 2 flexible EPDM fabric hoses 1/2” T100, each 3 m long, high temperature resistant max. 100 °C. On sturdy tubular steel frame with air-filled impellers. In cardboard box.”





”Electric filling and flushing unit for quick and easy filling, flushing and venting of closed systems. Max. flow rate 36 l/min, tank volume 30 litres. With centrifugal pump, temperature-resistant for continuous load max. 60°C. Delivery pressure max. 0.55 MPa/5.5 bar/80 psi. Condenser motor 230 V, 50 Hz, 860 W. 2 pieces of flexible, transparent PVC fabric hoses 1/2” T60, each 3 m long, temperature-resistant max. 60 °C. On sturdy tubular steel frame with air-filled wheels. In box.”


”For pressure or return line, 3 m long, with 3/4” hose fittings, temperature-resistant max. 60 degreesC”
”For pressure or return line, 3 m long, with 3/4” hose fittings, high-temperature-resistant max. 100 degreesC”
”For pressure or return line, 3 m long, with 3/4” hose fittings, high-temperature-resistant max. 165 degreesC”



”washable, with large dirt collection container, for return line with 3/4” connection, for flushing underfloor/wall heating systems and for removing sludge.”
for closing the pressure or return line, e.g. during transport
for alternative suction of the pumped medium from another container, e.g. for larger filling quantities.
”complete with EPDM fabric hose 1/2” T100, for flushing floor/wall surface heating systems and for effective removal of sludge due to pressure surges when changing the direction of flow. ”
for REMS Solar-Push



























made of UV-stabilised PE






. stabilised PE









”Electric pressure test pump with pressure gauge, p max. 6 MPa/ 60 bar/ 870 psi, for pressure and leak testing of pipework systems and tanks up to 6 MPa/60 bar/870 psi, with adjustable pressure limitation. Pump unit with capacitor motor 230 V, 50 Hz, 1300 W. 1.5 m suction hose with 1/2” connection, backflow preventer. 1.5 m high-pressure hose with 1/2” connection. In cardboard box.