Rothenberger Core bit, High Speed Plus natural stone, G1/2, ø 30mm FF44835
doneBreite (m): 0.035
doneLänge (m): 0.0185
Product data
Product description
The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch thread is suitable for wet drilling. With a maximum usable length of 125 mm, the diamond core bit can produce holes with a diameter of 35 mm. Extremely cutting-fast core bit with a long service life, due to the high segments with a high diamond content. The over-turned core bit body reduces wear on the core bit. Drilling on the edge or border of the material without damaging it is possible by using diamond rings.
Tilers, stair and railing fitters, as well as garden and landscape designers can drill holes quickly and reliably with a hand-held core drilling machine and using the High Speed Plus natural stone core bit.
Area of application
Special wet core bits for drilling in natural stone,
granite, marble, (double) fired bricks, masonry,
(reinforced) concrete, glass or hollow bricks in Ø 35 mm with threaded connection G 1/2”
Extremely easy-cutting segments for hard materials. Long service life despite soft diamond segments. Drilling in material combinations possible (tile & concrete surface). Over-turned core bit body for exact concentricity and therefore less wear. Standard threaded connection with G1/2 in, suitable for all ROTHENBERGER diamond drilling machines.
- ETIM Code EC000704
- eClass Code 21180144
- Class Code ECLASS ADS578
- Diameter 35 mm
- Thread mount standard
- Number of segments 0
- Segment length 0
- Segment width 0
- Segment height 0
- Tiles No
- Granite Yes
- Marble Yes
- Clinker Yes
- Masonry Yes
- Sand-lime brick No
- Asphalt Yes
- Screed No
- Concrete Yes
- Heavily reinforced concrete Yes
- Usable length 125 mm
- Segment size 0 X 0 X 0 mm
- Speed electronics No
- Protection class IP 20
- Drilling range concrete 35 mm
- Drilling range masonry 35 mm
- Drilling range 35 – 35 mm
- Drilling stroke 125 mm
- Extremely cutting segments for hard materials
- Long service life despite soft diamond segments
- Drilling in material combinations possible (tile and concrete surface)
- Over-turned core bit body for exact concentricity and therefore less wear
- Standard threaded connection with G1/2”, suitable for all ROTHENBERGER diamond drilling machines
Additional information
Related results
Complete catalogs
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Product suggestions
The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch thread is suitable for wet drilling. With a maximum usable length of 125 mm, the diamond core bit can produce holes with a diameter of 35 mm. Extremely cutting-fast core bit with a long service life, due to the high segments with a high diamond content. The over-turned core bit body reduces wear on the core bit. Drilling on the edge or border of the material without damaging it is possible by using diamond rings.
Tilers, stair and railing fitters, as well as garden and landscape designers can drill holes quickly and reliably with a hand-held core drilling machine and using the High Speed Plus natural stone core bit.
Area of application
Special wet core bits for drilling in natural stone,
granite, marble, (double) fired bricks, masonry,
(reinforced) concrete, glass or hollow bricks in Ø 35 mm with threaded connection G 1/2”
Extremely easy-cutting segments for hard materials. Long service life despite soft diamond segments. Drilling in material combinations possible (tile & concrete surface). Over-turned core bit body for exact concentricity and therefore less wear. Standard threaded connection with G1/2 in, suitable for all ROTHENBERGER diamond drilling machines.
4004625448359-63 4004625448359 https://www.toolteam.com/en-GB/rothenberger-core-bit-high-speed-plus-natural-stone-g1-2-o-30mm-ff44835-t-541972-4004625448359?dc=GB&cu=EUR 2024-12-02 161.3 DE 14