Rothenberger Manual electric thread cutting stock, SUPERTRONIC 2000, up to 2 864273216
doneSpannung (V) von: 100V
Product data
Product description
Plumbing, heating and air conditioning fitters produce pipe threads in accordance with EN 10226 (BSPT R) on steel pipes in accordance with DIN EN 10255 MH, in sizes from R1/4 to 2, by hand or with hand-held electric thread cutting stocks.
Area of application
Hand-held electric thread cutting stock, for producing pipe threads in accordance with EN 10226 (old DIN 2999) on steel pipes in accordance with DIN EN 10255 MH, in sizes from R1/4” to 2”.
4 times faster return thanks to return gear. User-friendly operation thanks to large switch for forward and reverse. Firm fit of the cutting heads thanks to direct mount with snap ring lock. Thread cutting close to the wall thanks to off-center cutting head mount. High and constant transmission torque at full load. Ideal for hard-to-reach places (corners, shafts). Secure hold in both directions of rotation thanks to hardened, prism-toothed counterholder. Easy to maintain thanks to permanent lubrication.
- Working area diameter up to (inch)2”INCH
- Output power (up to)1700W
- Speed15UMIN
- Input power (from)1010W
- Frequency (up to)60HZ
- Frequency (from)50HZ
- Power cable length1.5M
- Voltage (up to)120V
- Voltage (from)100V
- ETIM: EC001379
Additional information
Related results
Complete catalogs
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Product suggestions
Plumbing, heating and air conditioning fitters produce pipe threads in accordance with EN 10226 (BSPT R) on steel pipes in accordance with DIN EN 10255 MH, in sizes from R1/4 to 2, by hand or with hand-held electric thread cutting stocks.
Area of application
Hand-held electric thread cutting stock, for producing pipe threads in accordance with EN 10226 (old DIN 2999) on steel pipes in accordance with DIN EN 10255 MH, in sizes from R1/4” to 2”.
4 times faster return thanks to return gear. User-friendly operation thanks to large switch for forward and reverse. Firm fit of the cutting heads thanks to direct mount with snap ring lock. Thread cutting close to the wall thanks to off-center cutting head mount. High and constant transmission torque at full load. Ideal for hard-to-reach places (corners, shafts). Secure hold in both directions of rotation thanks to hardened, prism-toothed counterholder. Easy to maintain thanks to permanent lubrication.
8414162033639-63 8414162033639 https://www.toolteam.com/en-GB/rothenberger-manual-electric-thread-cutting-stock-supertronic-2000-up-to-2-864273216-t-542045-8414162033639?dc=GB&cu=EUR 2024-11-19 1833.74 DE 14