zoom_in
zoom_out
fullscreen
-66%
Ruko Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 20 mm 108920E
Sku: T-13328
23,40 € (excl. legal VAT, excl. Shipping)
69,03 € MSRP
In stock,ready for shipping within 48h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-13320 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 12 mm | 108912E | ||
T-13321 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 13 mm | 108913E | ||
T-13322 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 14 mm | 108914E | ||
T-13323 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 15 mm | 108915E | ||
T-13324 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 16 mm | 108916E | ||
T-13325 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 17 mm | 108917E | ||
T-13326 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 18 mm | 108918E | ||
T-13327 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 19 mm | 108919E | ||
T-13331 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 21 mm | 108921E | ||
T-13332 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 22 mm | 108922E | ||
T-13333 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 23 mm | 108923E | ||
T-13334 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 24 mm | 108924E | ||
T-13335 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 25 mm | 108925E | ||
T-13336 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 26 mm | 108926E | ||
T-13337 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 27 mm | 108927E | ||
T-13338 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 28 mm | 108928E | ||
T-13339 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 29 mm | 108929E | ||
T-13340 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 30 mm | 108930E | ||
T-13342 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 32 mm | 108932E | ||
T-13345 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 35 mm | 108935E | ||
T-13346 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 36 mm | 108936E | ||
T-13350 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 40 mm | 108940E | ||
T-13355 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 45 mm | 108945E | ||
T-13360 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 50 mm | 108950E | ||
T-13365 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 55 mm | 108955E | ||
T-13370 | Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 60 mm | 108960E |
doneInsert guide pin into core drill.
Core drill made of cobalt-alloyed high-performance high-speed steel with higher heat resistance. Ideal for drilling difficult-to-machine materials and for the highest demands. Suitable for machining unalloyed and alloyed steels (up to 1200 N/mm²), hot and cold work steels, as well as for tempering and case-hardening steels.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-13328
SKU manufacturer:
108920E
GTIN Code (EAN):
4007140110619
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 20 mm. Cutting depth: 50 mm - Core drills made of cobalt alloyed heavy-duty high speed steel with increased heat resistance. Ideal for drilling materials that are difficult to cut and for the highest demands.; Suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), hot and cold-working steel and also for reinforced and case-hardened steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; + Optimised cutting edge geometry for increased cutting performances and reduced cutting forces. ; + The effective cutting angles are designed for universal use in various sorts of steel.; + Improved removal of chips thanks to U-shaped recesses. The specific geometry of the recess reduces the thermal load on the HSS core drill as the heat created in cutting is removed with the chips to a very great extent.; + Reduction of the friction between the HSS core drill and the workpiece thanks to optimised spiral-shaped guide chamfers.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.
- Core drill HSS Co 5 ComPact with Quick IN shaft. Ø 20 mm
- Can be used in all column and magnetic stand drilling machines in conjunction with the Quick IN system holder, such as the Fein KBM 32 Q.
- They have a drilling time that is up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Insert the core drill into the Quick IN holder
- Drill to size immediately, no need for punching or pre-drilling
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to loosen the cut-out pieces.
- Observe the speed table and use coolant!
Additional information
Diameter:
20,0 mm
Schneiden:
HSS Co 5 ComPact
Schnitttiefe:
35,0 mm
Schaft Ø:
18,0mm
Maschine:
mit Aufnahmehalter Quick-In-System
Schaftdurchmesser mm (2):
18,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Nettogewicht:
0,135 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-61%
Round dies M DIN EN 22568 HSS, ground M 5
238050
5,92 €
15,25 € MSRP
-66%
Twist drill DIN 338 TL 3000 HSSE Co 5 TiAlN
229063F
5,84 €
17,02 € MSRP
-57%
Twist drill DIN 338 type VA HSSE Co 8 TiAlN
281130EF
24,37 €
56,85 € MSRP
-62%
Twist drill DIN 338 TL 3000 HSS TiN
258070T
5,67 €
14,95 € MSRP
-64%
Tungsten carbide multigrade hole saw MHS Ø 75 mm
113075
156,93 €
430,00 € MSRP
-39%
Twist drill DIN 338 type N HSS G
214004S
0,82 €
1,34 € MSRP
-63%
Machine tap MF DIN 374 HSS Co 5, MF 14
261141E
19,29 €
51,60 € MSRP
-52%
Twist drill DIN 338 type UNI HSSE Co 5
228045
3,02 €
6,30 € MSRP
-33%
Spot drill HSS ground, extra short, with split point.
251033
0,76 €
1,13 € MSRP
-63%
HSS Co 8 bi-metal hole saw, with fine toothing Ø 46 mm
126046
7,27 €
19,49 € MSRP
-59%
Spot Weld Miller HSS
101101
7,69 €
18,87 € MSRP
-63%
Hand tap MF DIN 2181 HSS. Final tap, ground MF 30
235380-2
41,64 €
112,48 € MSRP
-67%
Core drill HSS-TiAlN with weldon shank (3/4”). Ø 26 mm
108526F
56,09 €
168,57 € MSRP
-64%
Twist drill DIN 338 type N HSS G
214195
16,79 €
46,20 € MSRP
-63%
Jobber length DIN 338 TL 3000 HSS-TiAlN ground, with split point
258821F
7,55 €
20,25 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 20 mm 108920E
Ø 20 mm. Cutting depth: 50 mm - Core drills made of cobalt alloyed heavy-duty high speed steel with increased heat resistance. Ideal for drilling materials that are difficult to cut and for the highest demands.; Suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), hot and cold-working steel and also for reinforced and case-hardened steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; + Optimised cutting edge geometry for increased cutting performances and reduced cutting forces. ; + The effective cutting angles are designed for universal use in various sorts of steel.; + Improved removal of chips thanks to U-shaped recesses. The specific geometry of the recess reduces the thermal load on the HSS core drill as the heat created in cutting is removed with the chips to a very great extent.; + Reduction of the friction between the HSS core drill and the workpiece thanks to optimised spiral-shaped guide chamfers.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.
4007140110619-60
4007140110619
https://www.toolteam.com/en-GB/ruko-core-drill-hss-co-5-compact-with-quick-in-adapter-o-20-mm-108920e-t-13328-4007140110619.html?dc=GB&cu=EUR
2024-09-23
23.4
DE
14