zoom_in
zoom_out
fullscreen
-67%
Ruko Core drill HSS-TiAlN with weldon shank (3/4”). Ø 43 mm 108543F
Sku: T-13176
100,25 € (excl. legal VAT, excl. Shipping)
302,10 € MSRP
In stock,ready for shipping
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-13083 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 12 mm | 108512F | ||
T-13086 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 13 mm | 108513F | ||
T-13089 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 14 mm | 108514F | ||
T-13092 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 15 mm | 108515F | ||
T-13095 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 16 mm | 108516F | ||
T-13098 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 17 mm | 108517F | ||
T-13101 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 18 mm | 108518F | ||
T-13104 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 19 mm | 108519F | ||
T-13107 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 20 mm | 108520F | ||
T-13110 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 21 mm | 108521F | ||
T-13113 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 22 mm | 108522F | ||
T-13116 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 23 mm | 108523F | ||
T-13119 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 24 mm | 108524F | ||
T-13122 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 25 mm | 108525F | ||
T-13125 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 26 mm | 108526F | ||
T-13128 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 27 mm | 108527F | ||
T-13131 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 28 mm | 108528F | ||
T-13134 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 29 mm | 108529F | ||
T-13137 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 30 mm | 108530F | ||
T-13140 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 31 mm | 108531F | ||
T-13143 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 32 mm | 108532F | ||
T-13146 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 33 mm | 108533F | ||
T-13149 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 34 mm | 108534F | ||
T-13152 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 35 mm | 108535F | ||
T-13155 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 36 mm | 108536F | ||
T-13158 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 37 mm | 108537F | ||
T-13161 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 38 mm | 108538F | ||
T-13164 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 39 mm | 108539F | ||
T-13167 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 40 mm | 108540F | ||
T-13170 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 41 mm | 108541F | ||
T-13173 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 42 mm | 108542F | ||
T-13179 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 44 mm | 108544F | ||
T-13182 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 45 mm | 108545F | ||
T-13185 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 46 mm | 108546F | ||
T-13188 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 47 mm | 108547F | ||
T-13191 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 48 mm | 108548F | ||
T-13194 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 49 mm | 108549F | ||
T-13197 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 50 mm | 108550F | ||
T-13200 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 51 mm | 108551F | ||
T-13203 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 52 mm | 108552F | ||
T-13206 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 53 mm | 108553F | ||
T-13209 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 54 mm | 108554F | ||
T-13212 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 55 mm | 108555F | ||
T-13215 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 56 mm | 108556F | ||
T-13218 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 57 mm | 108557F | ||
T-13221 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 58 mm | 108558F | ||
T-13224 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 59 mm | 108559F | ||
T-13227 | Core drill HSS-TiAlN with weldon shank (3/4”). Ø 60 mm | 108560F |
doneInsert the guide pin into the core drill.
Core drill made of high-performance high-speed steel with titanium-aluminium nitride coating. The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3,000 HV / microhardness and the hot hardening resistance to up to 900°C. It is characterized by high toughness and high thermal and chemical stability and is used to achieve longer service lives and cutting values. The TiAlN coating makes it suitable for dry machining. Particularly suitable for machining unalloyed and alloyed steels (up to 1200 N/mm²), high-chromium alloyed steels such as V2A and V4A, as well as cast steel and tough brass.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-13176
SKU manufacturer:
108543F
GTIN Code (EAN):
4007140290274
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 43 mm. Cutting depth: 55 mm - Core drills made of heavy-duty high speed steel with titanium aluminium nitride coating. ; The TiAIN wear-resistant coating increases the surface hardness of the tool to approx. 3,000 HV / micro-hardness and the heat resistance to 900° C. It is characterised by high tenacity plus high thermal and chemical stability and helps to achieve better tool life and cutting values. Suitable for dry finishing due to TiAIN coating. Especially suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), high-alloyed chromium steel such as stainless and acidresistant steel, as well as cast iron and tough brass.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; + Optimised cutting edge geometry for increased cutting performances and reduced cutting; forces. ; + The effective cutting angles are designed for universal use in various sorts of steel.; + Improved removal of chips thanks to U-shaped recesses. The specific geometry of the recess reduces the thermal load on the HSS core drill as the heat created in cutting is removed with the chips to a very great extent.; + Reduction of the friction between the HSS core drill and the workpiece thanks to optimised spiral-shaped guide chamfers.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 / RS40e drill.
- Core drill HSS-TiAlN with Weldon shank 3/4”. Ø 43 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 302 / 108 303
- or RUKO EasyLock no. 108 312 / 108 313.
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Push the core drill into the holder and tighten the hexagon socket screws.
- Make sure the core drill is properly seated in the holder.
- With the EasyLock quick-release holder, the core drill is automatically locked.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
43,0 mm
Schneiden:
HSS-TiAlN
Schnitttiefe:
55,0 mm
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Ø Weldonschaft:
19mm (3/4")
Schaftdurchmesser mm (2):
19,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Schaftdurchmesser Zoll / MK:
3/4
Nettogewicht:
0,27 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-60%
Twist drill DIN 340 type N HSSG TiN 6.50
203065T
3,61 €
8,95 € MSRP
-63%
Round dies G DIN EN 24231 HSS, ground G 3/4
240034
39,96 €
107,90 € MSRP
-55%
Hand tap M DIN 352 HSS, ground M 12
230120TX
7,44 €
16,39 € MSRP
-67%
Core drill HSS Co 5 ComPact with weldon shank (3/4”). Ø 60 mm
108260E
106,01 €
319,41 € MSRP
-60%
Unigrat deburrer set B
107003
12,27 €
30,63 € MSRP
-63%
Hand tap UNC DIN 352 HSS, ground No. 3
246030UNC
17,48 €
46,68 € MSRP
-45%
Twist drill DIN 338 type N HSS G TiN
250043T
1,00 €
1,81 € MSRP
-54%
Twist drill DIN 338 type VA HSSE Co 5
215012
1,09 €
2,39 € MSRP
-64%
Twist drill DIN 345 type N HSS
204510
123,32 €
341,05 € MSRP
-63%
Twist drill DIN 338 TL 3000 HSS
258103
6,93 €
18,57 € MSRP
-62%
Machine tap MF DIN 374 HSS Co 5, MF 14
260141E
15,88 €
42,34 € MSRP
-61%
Screw-hole punches with three-point cutting tip and ball bearing
109240K
26,60 €
67,44 € MSRP
-70%
Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 36 mm
108036
55,46 €
183,52 € MSRP
-66%
Twist drill DIN 338 TL 3000 HSSE Co 5
229098
6,72 €
19,79 € MSRP
-61%
Taper and deburring countersinker type D 75° HSS
102229
25,08 €
63,57 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill HSS-TiAlN with weldon shank (3/4”). Ø 43 mm 108543F
Ø 43 mm. Cutting depth: 55 mm - Core drills made of heavy-duty high speed steel with titanium aluminium nitride coating. ; The TiAIN wear-resistant coating increases the surface hardness of the tool to approx. 3,000 HV / micro-hardness and the heat resistance to 900° C. It is characterised by high tenacity plus high thermal and chemical stability and helps to achieve better tool life and cutting values. Suitable for dry finishing due to TiAIN coating. Especially suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), high-alloyed chromium steel such as stainless and acidresistant steel, as well as cast iron and tough brass.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; + Optimised cutting edge geometry for increased cutting performances and reduced cutting; forces. ; + The effective cutting angles are designed for universal use in various sorts of steel.; + Improved removal of chips thanks to U-shaped recesses. The specific geometry of the recess reduces the thermal load on the HSS core drill as the heat created in cutting is removed with the chips to a very great extent.; + Reduction of the friction between the HSS core drill and the workpiece thanks to optimised spiral-shaped guide chamfers.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 / RS40e drill.
4007140290274-60
4007140290274
https://www.toolteam.com/en-GB/ruko-core-drill-hss-tialn-with-weldon-shank-3-4-o-43-mm-108543f-t-13176-4007140290274.html?dc=GB&cu=EUR
2024-09-22
100.25
DE
14