zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 42 mm 1081142C
Sku: T-12579
75,67 € (excl. legal VAT, excl. Shipping)
253,03 € MSRP
In stock,ready for shipping within 48h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-12517 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 12 mm | 1081112C | ||
T-12519 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 13 mm | 1081113C | ||
T-12521 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 14 mm | 1081114C | ||
T-12523 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 15 mm | 1081115C | ||
T-12525 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 16 mm | 1081116C | ||
T-12527 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 17 mm | 1081117C | ||
T-12529 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 18 mm | 1081118C | ||
T-12531 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 19 mm | 1081119C | ||
T-12533 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 20 mm | 1081120C | ||
T-12535 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 21 mm | 1081121C | ||
T-12537 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 22 mm | 1081122C | ||
T-12539 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 23 mm | 1081123C | ||
T-12541 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 24 mm | 1081124C | ||
T-12543 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 25 mm | 1081125C | ||
T-12545 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 26 mm | 1081126C | ||
T-12547 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 27 mm | 1081127C | ||
T-12549 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 28 mm | 1081128C | ||
T-12551 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 29 mm | 1081129C | ||
T-12554 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 30 mm | 1081130C | ||
T-12556 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 31 mm | 1081131C | ||
T-12558 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 32 mm | 1081132C | ||
T-12560 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 33 mm | 1081133C | ||
T-12562 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 34 mm | 1081134C | ||
T-12564 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 35 mm | 1081135C | ||
T-12566 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 36 mm | 1081136C | ||
T-12568 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 37 mm | 1081137C | ||
T-12570 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 38 mm | 1081138C | ||
T-12572 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 39 mm | 1081139C | ||
T-12575 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 40 mm | 1081140C | ||
T-12577 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 41 mm | 1081141C | ||
T-12581 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 43 mm | 1081143C | ||
T-12583 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 44 mm | 1081144C | ||
T-12585 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 45 mm | 1081145C | ||
T-12587 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 46 mm | 1081146C | ||
T-12589 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 47 mm | 1081147C | ||
T-12591 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 48 mm | 1081148C | ||
T-12593 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 49 mm | 1081149C | ||
T-12596 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 50 mm | 1081150C |
doneInsert guide pin into core drill.
The RUKO core drills with Tecrona coating and carbide cutting edges can be used universally with non-hardened steels and superalloys (materials with very high alloy contents of AL, Ti, nickel such as Inconel, Husteloy, Inox). The Tecrona coating is the ideal coating for all drilling work that places extreme demands on the tool. It adheres very well to the tool, so the wear protection coating increases the surface hardness to approx. 4200 HV. The coefficient of friction with this coating is extremely low, which increases the service life with little wear.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12579
SKU manufacturer:
1081142C
GTIN Code (EAN):
4007140315151
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 42,0 mm, cutting depth 50 mm including Quick IN-adapter No. 108 111. - Core drills with tungsten carbide cutters + Tecrona coating.; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
- Tecrona core drill coated with hard metal cutting edges and Quick IN shaft. Ø 42 mm
- Can be used in all column and magnetic stand drilling machines in conjunction with the Quick IN system holder, such as the Fein KBM 32 Q.
- They have a drilling time that is up to 10 times shorter than twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Insert the core drill into the Quick IN holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to loosen the cut-out pieces.
- Observe the speed table and use coolant!
Additional information
Diameter:
42,0 mm
Schneiden:
Hartmetall + Tecrona Beschichtung
Schnitttiefe:
50,0 mm
Maschine:
mit Aufnahmehalter Quick-In-System
Ø Quick IN Schaft:
18mm
Schaftdurchmesser mm (2):
18,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Nettogewicht:
0,325 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-60%
Twist drill DIN 340 type N HSSG TiN 7,20
203072T
3,99 €
9,99 € MSRP
-13%
Twist drill DIN 338 type N HSS rolled
201035B
0,55 €
-60%
Twist drill DIN 338 TL 3000 HSSE Co 5
229040
1,76 €
4,37 € MSRP
-62%
Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point
253089
13,02 €
34,50 € MSRP
-60%
Twist augers chrome vanadium steel
208608
16,38 €
41,17 € MSRP
-63%
Twist drill DIN 338 TL 3000 HSS TiN
258096T
7,56 €
20,29 € MSRP
-61%
Slotted taper and deburring countersinker 90° HSS-TiN
102305T
61,13 €
157,52 € MSRP
-62%
Solid TC twist drills DIN 338 type N TiAIN coated with split point
814060
17,10 €
45,17 € MSRP
-56%
Twist drill DIN 338 type N HSS G
214079S
1,72 €
3,91 € MSRP
-61%
Hand tap UNC DIN 352 HSS, taper tap, ground 1/2”
246012UNC1
6,34 €
16,38 € MSRP
-66%
Twist drill DIN 338 TL 3000 HSSE Co 5 TiAlN
229080F
8,95 €
26,64 € MSRP
-62%
Twist drill DIN 338 type N HSS G TiN
250150T
12,44 €
32,94 € MSRP
-64%
Hand taps MF DIN 2181 HSS, ground MF 30
235480
133,53 €
369,40 € MSRP
-62%
Machine tap UNF 5/16” DIN 371 HSS Co 5, type B
265516UNF
7,89 €
20,55 € MSRP
-57%
Twist drill DIN 1897 type N HSSECo5 TiAlN 3.10
202031EF
2,39 €
5,62 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 42 mm 1081142C
Ø 42,0 mm, cutting depth 50 mm including Quick IN-adapter No. 108 111. - Core drills with tungsten carbide cutters + Tecrona coating.; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
4007140315151-60
4007140315151
https://www.toolteam.com/en-GB/ruko-core-drill-tecrona-coated-with-tungsten-carbide-and-quick-in-shank-o-42-mm-1081142c-t-12579-4007140315151.html?dc=GB&cu=EUR
2024-09-23
75.67
DE
14