zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 50 mm 1081150C
Sku: T-12596
84,50 € (excl. legal VAT, excl. Shipping)
282,65 € MSRP
In stock,ready for shipping within 48h
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-12517 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 12 mm | 1081112C | |
|
T-12519 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 13 mm | 1081113C | |
|
T-12521 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 14 mm | 1081114C | |
|
T-12523 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 15 mm | 1081115C | |
|
T-12525 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 16 mm | 1081116C | |
|
T-12527 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 17 mm | 1081117C | |
|
T-12529 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 18 mm | 1081118C | |
|
T-12531 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 19 mm | 1081119C | |
|
T-12533 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 20 mm | 1081120C | |
|
T-12535 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 21 mm | 1081121C | |
|
T-12537 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 22 mm | 1081122C | |
|
T-12539 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 23 mm | 1081123C | |
|
T-12541 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 24 mm | 1081124C | |
|
T-12543 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 25 mm | 1081125C | |
|
T-12545 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 26 mm | 1081126C | |
|
T-12547 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 27 mm | 1081127C | |
|
T-12549 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 28 mm | 1081128C | |
|
T-12551 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 29 mm | 1081129C | |
|
T-12554 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 30 mm | 1081130C | |
|
T-12556 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 31 mm | 1081131C | |
|
T-12558 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 32 mm | 1081132C | |
|
T-12560 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 33 mm | 1081133C | |
|
T-12562 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 34 mm | 1081134C | |
|
T-12564 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 35 mm | 1081135C | |
|
T-12566 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 36 mm | 1081136C | |
|
T-12568 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 37 mm | 1081137C | |
|
T-12570 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 38 mm | 1081138C | |
|
T-12572 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 39 mm | 1081139C | |
|
T-12575 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 40 mm | 1081140C | |
|
T-12577 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 41 mm | 1081141C | |
|
T-12579 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 42 mm | 1081142C | |
|
T-12581 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 43 mm | 1081143C | |
|
T-12583 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 44 mm | 1081144C | |
|
T-12585 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 45 mm | 1081145C | |
|
T-12587 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 46 mm | 1081146C | |
|
T-12589 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 47 mm | 1081147C | |
|
T-12591 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 48 mm | 1081148C | |
|
T-12593 | Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 49 mm | 1081149C |
doneInsert guide pin into core drill.
The RUKO core drills with Tecrona coating and carbide cutting edges can be used universally with non-hardened steels and superalloys (materials with very high alloy contents of AL, Ti, nickel such as Inconel, Husteloy, Inox). The Tecrona coating is the ideal coating for all drilling work that places extreme demands on the tool. It adheres very well to the tool, so the wear protection coating increases the surface hardness to approx. 4200 HV. The coefficient of friction with this coating is extremely low, which increases the service life with little wear.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12596
SKU manufacturer:
1081150C
GTIN Code (EAN):
4007140315236
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 50,0 mm, cutting depth 50 mm including Quick IN-adapter No. 108 111. - Core drills with tungsten carbide cutters + Tecrona coating.; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
- Tecrona core drill coated with hard metal cutting edges and Quick IN shaft. Ø 50 mm
- Can be used in all column and magnetic stand drilling machines in conjunction with the Quick IN system holder, such as the Fein KBM 32 Q.
- They have a drilling time that is up to 10 times shorter than twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Insert the core drill into the Quick IN holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to loosen the cut-out pieces.
- Observe the speed table and use coolant!
Additional information
Diameter:
50,0 mm
Schneiden:
Hartmetall + Tecrona Beschichtung
Schnitttiefe:
50,0 mm
Maschine:
mit Aufnahmehalter Quick-In-System
Ø Quick IN Schaft:
18mm
Schaftdurchmesser mm (2):
18,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Nettogewicht:
0,42 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-62%
Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point
253067
7,69 €
20,04 € MSRP
-62%
Combined machine tap bit ”long” M 3 HSS-TiN
270014T
10,63 €
27,97 € MSRP
-67%
EasyLock with thread M 14 and interior cooling
108314
147,61 €
441,92 € MSRP
-69%
7-piece set of machine taps HSS type C 35°
245058RO
52,44 €
167,18 € MSRP
-60%
SDS-max spade chisel
227016
19,45 €
49,08 € MSRP
-61%
Taper and deburring countersinker-bit-set 90° HSS-TiN
102319TRO
109,24 €
282,23 € MSRP
-60%
Hand deburrer DIN 335 type C 90°
102145
13,53 €
33,86 € MSRP
-61%
Unigrat countersinker F 30
107034
27,77 €
70,42 € MSRP
-59%
Slotted taper and deburring countersinker 90° HSS
102301
6,51 €
15,87 € MSRP
-59%
T-shank style jig-saw blade 8033 HSS bimetal
3218033
7,65 €
18,73 € MSRP
-60%
Tube and sheet drill bits HSS 1/4”, CBN ground with split point
101049H
13,24 €
33,10 € MSRP
-58%
Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)
214215LIRO
156,68 €
376,60 € MSRP
-61%
Tube and sheet drill-set HSS-TiN, ground in plastic case (ABS)
101020TRO
91,17 €
235,34 € MSRP
-37%
HSS burr 81 HSS
22900813
147,35 €
234,45 € MSRP
-17%
TB 10 Eco plus bench drilling machines
217200
1.413,94 €
1.695,20 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 50 mm 1081150C
Ø 50,0 mm, cutting depth 50 mm including Quick IN-adapter No. 108 111. - Core drills with tungsten carbide cutters + Tecrona coating.; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
4007140315236-60
4007140315236
https://www.toolteam.com/en-GB/ruko-core-drill-tecrona-coated-with-tungsten-carbide-and-quick-in-shank-o-50-mm-1081150c-t-12596-4007140315236?dc=GB&cu=EUR
2024-11-19
84.5
DE
14