zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 13 mm 108713C
Sku: T-13232
52,98 € (excl. legal VAT, excl. Shipping)
175,20 € MSRP
In stock,ready for shipping within 24h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-13230 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm | 108712C | ||
T-13234 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 14 mm | 108714C | ||
T-13236 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 15 mm | 108715C | ||
T-13238 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 16 mm | 108716C | ||
T-13240 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 17 mm | 108717C | ||
T-13242 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 18 mm | 108718C | ||
T-13244 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm | 108719C | ||
T-13246 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 20 mm | 108720C | ||
T-13248 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 21 mm | 108721C | ||
T-13250 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 22 mm | 108722C | ||
T-13252 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 23 mm | 108723C | ||
T-13254 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 24 mm | 108724C | ||
T-13256 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 25 mm | 108725C | ||
T-13258 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 26 mm | 108726C | ||
T-13260 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 27 mm | 108727C | ||
T-13262 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 28 mm | 108728C | ||
T-13264 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 29 mm | 108729C | ||
T-13266 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 30 mm | 108730C | ||
T-13268 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 31 mm | 108731C | ||
T-13270 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 32 mm | 108732C | ||
T-13272 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 33 mm | 108733C | ||
T-13274 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 34 mm | 108734C | ||
T-13276 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 35 mm | 108735C | ||
T-13278 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 36 mm | 108736C | ||
T-13280 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 37 mm | 108737C | ||
T-13282 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 38 mm | 108738C | ||
T-13284 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 39 mm | 108739C | ||
T-13286 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 40 mm | 108740C | ||
T-13288 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 41 mm | 108741C | ||
T-13290 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 42 mm | 108742C | ||
T-13292 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 43 mm | 108743C | ||
T-13294 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 44 mm | 108744C | ||
T-13296 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 45 mm | 108745C | ||
T-13298 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 46 mm | 108746C | ||
T-13300 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 47 mm | 108747C | ||
T-13302 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 48 mm | 108748C | ||
T-13304 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 49 mm | 108749C | ||
T-13306 | Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 50 mm | 108750C |
doneInsert the guide pin into the core drill.
The RUKO core drills with Tecrona coating and carbide cutting edges can be used universally with non-hardened steels and superalloys (materials with very high alloy contents of AL, Ti, nickel such as Inconel, Husteloy, Inox). The Tecrona coating is the ideal coating for all drilling work that places extreme demands on the tool. It adheres very well to the tool, so the wear protection coating increases the surface hardness to approx. 4200 HV. The coefficient of friction with this coating is extremely low, which increases the service life with little wear.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-13232
SKU manufacturer:
108713C
GTIN Code (EAN):
4007140314444
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 13 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters + Tecrona coating. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS 10 / RS20 / RS25e / RS30e / RS40e drill.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
- Core drill Tecrona coated with hard metal cutting edges and Weldon shank 3/4”. Ø 13 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 302 / 108 303
- the RUKO EasyLock no. 108 312 / 108 313 or with
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Push the core drill into the holder and tighten the hexagon socket screws.
- Make sure the core drill is properly seated in the holder.
- With the EasyLock quick-release holder, the core drill is automatically locked.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
13,0 mm
Schneiden:
Hartmetall + Tecrona Beschichtung
Schnitttiefe:
50,0 mm
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Ø Weldonschaft:
19mm (3/4")
Schaftdurchmesser mm (2):
19,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Schaftdurchmesser Zoll / MK:
3/4
Nettogewicht:
0,1 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-33%
Twist drill DIN 1897 type N HSS rolled, short
202032
0,76 €
1,13 € MSRP
-62%
Hand tap M DIN 352 HSS Taper tap, left-hand cutting, ground M 20
230200LI-1
13,77 €
36,55 € MSRP
-66%
Tungsten carbide rotary burr TiCN shape C oval (WRC)
116022TC
15,04 €
44,03 € MSRP
-58%
Twist drill DIN 338 type N HSS rolled
2010875
1,42 €
3,40 € MSRP
-62%
Twist drill DIN 345 type N HSS
204200
11,81 €
31,25 € MSRP
-63%
Twist drill DIN 338 TL 3000 HSS TiN
258102T
8,24 €
22,23 € MSRP
-58%
Twist drill DIN 338 type N HSS G
214092
2,31 €
5,46 € MSRP
-60%
SDS-plus hammer drill
211068
11,22 €
27,90 € MSRP
-70%
Core drill Tecrona coated with tungsten-carbide cutting edges and threaded retainer. Ø 30 mm
108030C
52,98 €
175,20 € MSRP
-63%
HSS bi-metal hole saw, with varied toothing Ø 98 mm
106098
11,64 €
31,76 € MSRP
-64%
HSS Co 8 bi-metal hole saw, with fine toothing Ø 108 mm
126108
20,55 €
56,80 € MSRP
-66%
Tungsten carbide rotary burr shape J cone 60° (KSJ)
116225
13,99 €
40,84 € MSRP
-67%
Twist drill DIN 338 TL 3000 HSSE Co 5
229113
9,79 €
29,24 € MSRP
-57%
Drill cabinet empty
2052081L
552,77 €
1.276,47 € MSRP
-67%
Twist drill DIN 338 TL 3000 HSSE Co 5 TiAlN
229098F
11,39 €
34,28 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 13 mm 108713C
Ø 13 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters + Tecrona coating. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS 10 / RS20 / RS25e / RS30e / RS40e drill.; Advantages of the Tecrona coating; The Tecrona coating is ideal for all operations that are carried out without cooling or lubrication. It adheres very well to the tool, thereby increasing the surface hardness of the wear protection coating to approximately 4200 HV and the thermal resistance up to 1100°C. ; The coefficient of friction is very low for this coating, thereby increasing the service life with low wear.
4007140314444-60
4007140314444
https://www.toolteam.com/en-GB/ruko-core-drill-tecrona-coated-with-tungsten-carbide-cutting-edges-and-weldon-shank-3-4-o-13-mm-108713c-t-13232-4007140314444.html?dc=GB&cu=EUR
2024-09-22
52.98
DE
14