zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill with tungsten-carbide and Quick IN-shank. Ø 27 mm 1081127
Sku: T-12546
45,04 € (excl. legal VAT, excl. Shipping)
148,82 € MSRP
In stock,ready for shipping within 48h
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-12516 | Core drill with tungsten-carbide and Quick IN-shank. Ø 12 mm | 1081112 | |
|
T-12518 | Core drill with tungsten-carbide and Quick IN-shank. Ø 13 mm | 1081113 | |
|
T-12520 | Core drill with tungsten-carbide and Quick IN-shank. Ø 14 mm | 1081114 | |
|
T-12522 | Core drill with tungsten-carbide and Quick IN-shank. Ø 15 mm | 1081115 | |
|
T-12524 | Core drill with tungsten-carbide and Quick IN-shank. Ø 16 mm | 1081116 | |
|
T-12526 | Core drill with tungsten-carbide and Quick IN-shank. Ø 17 mm | 1081117 | |
|
T-12528 | Core drill with tungsten-carbide and Quick IN-shank. Ø 18 mm | 1081118 | |
|
T-12530 | Core drill with tungsten-carbide and Quick IN-shank. Ø 19 mm | 1081119 | |
|
T-12532 | Core drill with tungsten-carbide and Quick IN-shank. Ø 20 mm | 1081120 | |
|
T-12534 | Core drill with tungsten-carbide and Quick IN-shank. Ø 21 mm | 1081121 | |
|
T-12536 | Core drill with tungsten-carbide and Quick IN-shank. Ø 22 mm | 1081122 | |
|
T-12538 | Core drill with tungsten-carbide and Quick IN-shank. Ø 23 mm | 1081123 | |
|
T-12540 | Core drill with tungsten-carbide and Quick IN-shank. Ø 24 mm | 1081124 | |
|
T-12542 | Core drill with tungsten-carbide and Quick IN-shank. Ø 25 mm | 1081125 | |
|
T-12544 | Core drill with tungsten-carbide and Quick IN-shank. Ø 26 mm | 1081126 | |
|
T-12548 | Core drill with tungsten-carbide and Quick IN-shank. Ø 28 mm | 1081128 | |
|
T-12550 | Core drill with tungsten-carbide and Quick IN-shank. Ø 29 mm | 1081129 | |
|
T-12553 | Core drill with tungsten-carbide and Quick IN-shank. Ø 30 mm | 1081130 | |
|
T-12555 | Core drill with tungsten-carbide and Quick IN-shank. Ø 31 mm | 1081131 | |
|
T-12557 | Core drill with tungsten-carbide and Quick IN-shank. Ø 32 mm | 1081132 | |
|
T-12559 | Core drill with tungsten-carbide and Quick IN-shank. Ø 33 mm | 1081133 | |
|
T-12561 | Core drill with tungsten-carbide and Quick IN-shank. Ø 34 mm | 1081134 | |
|
T-12563 | Core drill with tungsten-carbide and Quick IN-shank. Ø 35 mm | 1081135 | |
|
T-12565 | Core drill with tungsten-carbide and Quick IN-shank. Ø 36 mm | 1081136 | |
|
T-12567 | Core drill with tungsten-carbide and Quick IN-shank. Ø 37 mm | 1081137 | |
|
T-12569 | Core drill with tungsten-carbide and Quick IN-shank. Ø 38 mm | 1081138 | |
|
T-12571 | Core drill with tungsten-carbide and Quick IN-shank. Ø 39 mm | 1081139 | |
|
T-12574 | Core drill with tungsten-carbide and Quick IN-shank. Ø 40 mm | 1081140 | |
|
T-12576 | Core drill with tungsten-carbide and Quick IN-shank. Ø 41 mm | 1081141 | |
|
T-12578 | Core drill with tungsten-carbide and Quick IN-shank. Ø 42 mm | 1081142 | |
|
T-12580 | Core drill with tungsten-carbide and Quick IN-shank. Ø 43 mm | 1081143 | |
|
T-12582 | Core drill with tungsten-carbide and Quick IN-shank. Ø 44 mm | 1081144 | |
|
T-12584 | Core drill with tungsten-carbide and Quick IN-shank. Ø 45 mm | 1081145 | |
|
T-12586 | Core drill with tungsten-carbide and Quick IN-shank. Ø 46 mm | 1081146 | |
|
T-12588 | Core drill with tungsten-carbide and Quick IN-shank. Ø 47 mm | 1081147 | |
|
T-12590 | Core drill with tungsten-carbide and Quick IN-shank. Ø 48 mm | 1081148 | |
|
T-12592 | Core drill with tungsten-carbide and Quick IN-shank. Ø 49 mm | 1081149 | |
|
T-12595 | Core drill with tungsten-carbide and Quick IN-shank. Ø 50 mm | 1081150 |
doneInsert guide pin into core drill.
Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12546
SKU manufacturer:
1081127
GTIN Code (EAN):
4007140091376
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 27,0 mm, cutting depth 50 mm with fixed shank - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.
- Core drill with hard metal cutting edges and Quick IN shaft. Ø 27 mm
- Can be used in all column and magnetic stand drilling machines in conjunction with the Quick IN system holder, such as the Fein KBM 32 Q.
- They have a drilling time that is up to 10 times shorter than twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Insert the core drill into the Quick IN holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to loosen the cut-out pieces.
- Observe the speed table and use coolant!
Additional information
Diameter:
27,0 mm
Schneiden:
Hartmetall
Schnitttiefe:
50,0 mm
Maschine:
mit Aufnahmehalter Quick-In-System
Ø Quick IN Schaft:
18mm
Schaftdurchmesser mm (2):
19,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Schaftdurchmesser Zoll / MK:
3/4
Nettogewicht:
0,131 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-60%
Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point
253040
4,24 €
10,58 € MSRP
-69%
7-piece set of machine taps HSS type C 35°
245058RO
52,44 €
167,18 € MSRP
-60%
Hand deburrer DIN 335 type C 90°
102146
17,69 €
44,52 € MSRP
-61%
Slotted taper and deburring countersinker 90° HSS
102304
25,97 €
65,80 € MSRP
-61%
Tube and sheet drill-set HSS-TiN, ground in plastic case (ABS)
101020TRO
91,17 €
235,34 € MSRP
-58%
Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)
214215LIRO
156,68 €
376,60 € MSRP
-61%
Taper and deburring countersinker-bit-set 90° HSS-TiN
102319TRO
109,24 €
282,23 € MSRP
-61%
T-shank style jig-saw blade 8033 HSS bimetal
3238033
28,53 €
72,39 € MSRP
-61%
Unigrat countersinker F 30
107034
27,77 €
70,42 € MSRP
-60%
Tube and sheet drill bits HSS 1/4”, CBN ground with split point
101049H
13,24 €
33,10 € MSRP
-67%
EasyLock with thread M 14 and interior cooling
108314
147,61 €
441,92 € MSRP
-60%
SDS-max spade chisel
227017
24,08 €
60,92 € MSRP
-62%
Combined machine tap bit ”long” M 3 HSS-TiN
270014T
10,63 €
27,97 € MSRP
-33%
Sicherungsringzangen-Set 8-teilig
00 19 58 V02
140,08 €
207,81 € MSRP
-34%
Werkzeugkoffer Robust23 Elektro
00 21 35
555,42 €
838,15 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill with tungsten-carbide and Quick IN-shank. Ø 27 mm 1081127
Ø 27,0 mm, cutting depth 50 mm with fixed shank - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and column drilling machines in connection with Quick IN-adapter as the Fein KBM 32 Q.; Ø 12,0 mm up to Ø 32,0 mm with fixed shank.; Ø 33,0 mm up to Ø 80,0 mm including Quick IN-adapter No. 108 111.
4007140091376-60
4007140091376
https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-and-quick-in-shank-o-27-mm-1081127-t-12546-4007140091376?dc=GB&cu=EUR
2024-11-19
45.04
DE
14