Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm 108012 Thumbnail

Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm 108012

-70%

Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm 108012

Sku: T-12400

45,04 € (excl. legal VAT, excl. Shipping)

148,82 € MSRP

In stock,
ready for shipping within 48h

Product variants

Sku:	Name:	SKU manufacturer:
T-12402	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 13 mm	108013
T-12404	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 14 mm	108014
T-12406	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 15 mm	108015
T-12408	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 16 mm	108016
T-12410	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 17 mm	108017
T-12412	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 18 mm	108018
T-12414	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 19 mm	108019
T-12416	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 20 mm	108020
T-12418	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 21 mm	108021
T-12420	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 22 mm	108022
T-12422	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 23 mm	108023
T-12424	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 24 mm	108024
T-12426	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 25 mm	108025
T-12428	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 26 mm	108026
T-12430	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 27 mm	108027
T-12432	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 28 mm	108028
T-12434	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 29 mm	108029
T-12436	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 30 mm	108030
T-12438	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 31 mm	108031
T-12440	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 32 mm	108032
T-12442	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 33 mm	108033
T-12444	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 34 mm	108034
T-12446	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 35 mm	108035
T-12448	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 36 mm	108036
T-12450	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 37 mm	108037
T-12452	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 38 mm	108038
T-12454	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 39 mm	108039
T-12456	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 40 mm	108040
T-12458	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 41 mm	108041
T-12460	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 42 mm	108042
T-12462	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 43 mm	108043
T-12464	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 44 mm	108044
T-12466	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 45 mm	108045
T-12468	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 46 mm	108046
T-12470	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 47 mm	108047
T-12472	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 48 mm	108048
T-12474	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 49 mm	108049
T-12476	Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 50 mm	108050

Screw the core drill onto the holder.

Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels. Thread M18 x 6 P1.5

Content:

1 Piece

Shipping:

The shipping costs for United Kingdom could not be calculated automatically.

Provider:

Sales and delivery by ToolTeam®

Payment methods:

PayPal, Pay upon Invoice, Credit Card, Bank Prepayment, Bank Debit

Returns:

Consumers can return the item at the specified conditions: More details

Security:

Protected by the ToolTeam Buyer Protection: More details

Product data

Manufacturer:

Ruko GmbH

Condition:

NEW

Sku:

T-12400

SKU manufacturer:

108012

GTIN Code (EAN):

4007140057365

Weight:

0,00 Kg

All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

Ø 12 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.

Core drill with hard metal cutting edges and threaded holder. Ø 12 mm
Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread holder such as Fein
They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
With twist drills, the entire drill diameter must be machined. This requires a lot of force and high drive power.
Screw the core drill onto the holder.
Drill to size immediately, no need for punching or pre-drilling.
The cutting geometry of the core drill enables rapid chip removal upwards.
The spring-loaded guide pin helps to release the cut-out pieces.
Observe the speed table and use coolant.

Additional information

Diameter:

12,0 mm

Schneiden:

Hartmetall

Schnitttiefe:

50,0 mm

Für Aufnahmehalter:

MK2 / MK3

Maschine:

RS10 / RS20 / RS25e / RS30e / RS40e

Schaftdurchmesser mm/Zoll/MK Maßeinheit:

Schaftdurchmesser Zoll / MK:

2 / 3

Nettogewicht:

0,084 kg

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

Ruko main catalogue precision tools

324 Pages (PDF)
Commercial customer offer**

RUKO catalogue Core drilling technology

52 Pages (PDF)
Commercial customer offer**

RUKO oil change program

20 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-66%

Core drill HSS-TiAlN with weldon shank (3/4”). Ø 12 mm

Core drill Tecrona coated with tungsten-carbide cutting edges and threaded retainer. Ø 80 mm

Core drill HSS-TiAlN with weldon shank (3/4”). Ø 12 mm

Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm

Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 80 mm

Core drill Tecrona coated with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm

Core drill HSS Co 5 ComPact with Quick IN-Adapter. Ø 12 mm

Ejector pin for core drills TC with weldon shank

Core drill HSS with weldon shank (3/4”). Ø 12 mm

Ejector pin for core drills HSS and TC with weldon- and Quick IN-shank

Ejector pin for core drills HSS with weldon shank

Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm

Core drill HSS with weldon shank (3/4”). Ø 12 mm

Ejector pin for core drills HSS with weldon shank

Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm 108012 Ø 12 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65. 4007140057365-60 4007140057365 https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-threaded-retainer-o-12-mm-108012-t-12400-4007140057365?dc=GB&cu=EUR 2024-11-19 45.04 DE 14

Last searches

Frequent searches

All categories

Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm 108012

Product variants

Product data

Product description

Additional information

Related results

Complete catalogs

Matching catalog

Product suggestions