zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 14 mm 108014
Sku: T-12404
45,04 € (excl. legal VAT, excl. Shipping)
148,82 € MSRP
In stock,ready for shipping within 48h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-12400 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm | 108012 | ||
T-12402 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 13 mm | 108013 | ||
T-12406 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 15 mm | 108015 | ||
T-12408 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 16 mm | 108016 | ||
T-12410 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 17 mm | 108017 | ||
T-12412 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 18 mm | 108018 | ||
T-12414 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 19 mm | 108019 | ||
T-12416 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 20 mm | 108020 | ||
T-12418 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 21 mm | 108021 | ||
T-12420 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 22 mm | 108022 | ||
T-12422 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 23 mm | 108023 | ||
T-12424 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 24 mm | 108024 | ||
T-12426 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 25 mm | 108025 | ||
T-12428 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 26 mm | 108026 | ||
T-12430 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 27 mm | 108027 | ||
T-12432 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 28 mm | 108028 | ||
T-12434 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 29 mm | 108029 | ||
T-12436 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 30 mm | 108030 | ||
T-12438 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 31 mm | 108031 | ||
T-12440 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 32 mm | 108032 | ||
T-12442 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 33 mm | 108033 | ||
T-12444 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 34 mm | 108034 | ||
T-12446 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 35 mm | 108035 | ||
T-12448 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 36 mm | 108036 | ||
T-12450 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 37 mm | 108037 | ||
T-12452 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 38 mm | 108038 | ||
T-12454 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 39 mm | 108039 | ||
T-12456 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 40 mm | 108040 | ||
T-12458 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 41 mm | 108041 | ||
T-12460 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 42 mm | 108042 | ||
T-12462 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 43 mm | 108043 | ||
T-12464 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 44 mm | 108044 | ||
T-12466 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 45 mm | 108045 | ||
T-12468 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 46 mm | 108046 | ||
T-12470 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 47 mm | 108047 | ||
T-12472 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 48 mm | 108048 | ||
T-12474 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 49 mm | 108049 | ||
T-12476 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 50 mm | 108050 |
doneScrew the core drill onto the holder.
Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels. Thread M18 x 6 P1.5
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12404
SKU manufacturer:
108014
GTIN Code (EAN):
4007140057389
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 14 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
- Core drill with hard metal cutting edges and threaded holder. Ø 14 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread holder such as Fein
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Screw the core drill onto the holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
14,0 mm
Schneiden:
Hartmetall
Schnitttiefe:
50,0 mm
Für Aufnahmehalter:
MK2 / MK3
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
MK
Schaftdurchmesser Zoll / MK:
2 / 3
Nettogewicht:
0,09 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-53%
Twist drill DIN 338 type VA HSSE Co 8
281046E
3,27 €
6,89 € MSRP
-56%
Twist drill set DIN 338 type N HSS-TiN ground
A250214T
13,82 €
31,13 € MSRP
-61%
ULTIMATECUT countersink set HSS-E 6.3mm - 25.0mm 5 pcs, Rose
102791ERO
98,61 €
254,58 € MSRP
-70%
Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 27 mm
108727C
52,98 €
175,20 € MSRP
-63%
Twist drill DIN 1897 type N HSSECo5 TiAlN 11.00
202110EF
22,86 €
61,34 € MSRP
-50%
Unigrat blade E 350
107029
1,43 €
2,85 € MSRP
-63%
Twist drill DIN 340 type TL3000 HSSECo5 TiAlN 8.40
253084F
16,93 €
45,17 € MSRP
-59%
Taper and deburring countersinker type C 75° HSS
102221
7,27 €
17,77 € MSRP
-63%
Hand taps MF DIN 2181 HSS, ground MF 28
235280
72,06 €
197,10 € MSRP
-70%
Core drill Tecrona coated with tungsten-carbide and Quick IN-shank. Ø 12 mm
1081112C
52,98 €
175,20 € MSRP
-64%
Twist drill DIN 338 TL 3000 HSSE Co 5 TiAlN
229010F
3,61 €
10,08 € MSRP
-66%
Arbor holder with morse taper no. 2 shank and interior cooling with threaded retainer M18 x 6 P1,5
108104
108,40 €
321,34 € MSRP
-56%
Twist drill DIN 338 type N HSS rolled
201099
1,18 €
2,69 € MSRP
-61%
Hand tap M DIN 352 HSS final tap, ground M 14
230140-3
6,18 €
15,92 € MSRP
-60%
Taper and deburring countersinker DIN 335 type C 90° HSS-TiN, ground
102119T
18,57 €
46,80 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 14 mm 108014
Ø 14 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
4007140057389-60
4007140057389
https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-threaded-retainer-o-14-mm-108014-t-12404-4007140057389.html?dc=GB&cu=EUR
2024-09-23
45.04
DE
14