zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 39 mm 108039
Sku: T-12454
57,69 € (excl. legal VAT, excl. Shipping)
192,61 € MSRP
In stock,ready for shipping within 48h
Product variants
| Sku: | Name: | SKU manufacturer: | ||
|---|---|---|---|---|
|
T-12400 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm | 108012 | |
|
T-12402 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 13 mm | 108013 | |
|
T-12404 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 14 mm | 108014 | |
|
T-12406 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 15 mm | 108015 | |
|
T-12408 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 16 mm | 108016 | |
|
T-12410 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 17 mm | 108017 | |
|
T-12412 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 18 mm | 108018 | |
|
T-12414 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 19 mm | 108019 | |
|
T-12416 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 20 mm | 108020 | |
|
T-12418 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 21 mm | 108021 | |
|
T-12420 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 22 mm | 108022 | |
|
T-12422 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 23 mm | 108023 | |
|
T-12424 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 24 mm | 108024 | |
|
T-12426 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 25 mm | 108025 | |
|
T-12428 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 26 mm | 108026 | |
|
T-12430 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 27 mm | 108027 | |
|
T-12432 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 28 mm | 108028 | |
|
T-12434 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 29 mm | 108029 | |
|
T-12436 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 30 mm | 108030 | |
|
T-12438 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 31 mm | 108031 | |
|
T-12440 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 32 mm | 108032 | |
|
T-12442 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 33 mm | 108033 | |
|
T-12444 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 34 mm | 108034 | |
|
T-12446 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 35 mm | 108035 | |
|
T-12448 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 36 mm | 108036 | |
|
T-12450 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 37 mm | 108037 | |
|
T-12452 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 38 mm | 108038 | |
|
T-12456 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 40 mm | 108040 | |
|
T-12458 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 41 mm | 108041 | |
|
T-12460 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 42 mm | 108042 | |
|
T-12462 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 43 mm | 108043 | |
|
T-12464 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 44 mm | 108044 | |
|
T-12466 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 45 mm | 108045 | |
|
T-12468 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 46 mm | 108046 | |
|
T-12470 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 47 mm | 108047 | |
|
T-12472 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 48 mm | 108048 | |
|
T-12474 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 49 mm | 108049 | |
|
T-12476 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 50 mm | 108050 |
doneScrew the core drill onto the holder.
Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels. Thread M18 x 6 P1.5
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12454
SKU manufacturer:
108039
GTIN Code (EAN):
4007140008008
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 39 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
- Core drill with hard metal cutting edges and threaded holder. Ø 39 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread holder such as Fein
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Screw the core drill onto the holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
39,0 mm
Schneiden:
Hartmetall
Schnitttiefe:
50,0 mm
Für Aufnahmehalter:
MK2 / MK3
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
MK
Schaftdurchmesser Zoll / MK:
2 / 3
Nettogewicht:
0,21 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-70%
Core drill Tecrona coated with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm
108012C
52,98 €
175,20 € MSRP
-65%
Ejector pin for core drills HSS and TC with weldon- and Quick IN-shank
108110
7,82 €
22,39 € MSRP
-60%
Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point
253038
3,74 €
9,29 € MSRP
-60%
SDS-max spade chisel
227017
24,08 €
60,92 € MSRP
-59%
Slotted taper and deburring countersinker 90° HSS
102302
8,15 €
20,04 € MSRP
-60%
Hand deburrer DIN 335 type C 90°
102144
12,39 €
30,92 € MSRP
-61%
T-shank style jig-saw blade 8033 HSS bimetal
3238033
28,53 €
72,39 € MSRP
-62%
Combined machine tap bit ”long” M 3 HSS-TiN
270014T
10,63 €
27,97 € MSRP
-58%
Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)
214215LIRO
156,68 €
376,60 € MSRP
-67%
EasyLock with thread M 14 and interior cooling
108314
147,61 €
441,92 € MSRP
-61%
Unigrat countersinker F 30
107034
27,77 €
70,42 € MSRP
-69%
7-piece set of machine taps HSS type C 35°
245058RO
52,44 €
167,18 € MSRP
-61%
Taper and deburring countersinker-bit-set 90° HSS-TiN
102319TRO
109,24 €
282,23 € MSRP
-61%
Tube and sheet drill-set HSS-TiN, ground in plastic case (ABS)
101020TRO
91,17 €
235,34 € MSRP
-33%
Sicherungsringzangen-Set 8-teilig
00 19 58 V02
140,08 €
207,81 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 39 mm 108039
Ø 39 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
4007140008008-60
4007140008008
https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-threaded-retainer-o-39-mm-108039-t-12454-4007140008008?dc=GB&cu=EUR
2024-11-19
57.69
DE
14