zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 48 mm 108048
Sku: T-12472
76,09 € (excl. legal VAT, excl. Shipping)
254,41 € MSRP
In stock,ready for shipping within 24h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-12400 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 12 mm | 108012 | ||
T-12402 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 13 mm | 108013 | ||
T-12404 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 14 mm | 108014 | ||
T-12406 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 15 mm | 108015 | ||
T-12408 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 16 mm | 108016 | ||
T-12410 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 17 mm | 108017 | ||
T-12412 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 18 mm | 108018 | ||
T-12414 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 19 mm | 108019 | ||
T-12416 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 20 mm | 108020 | ||
T-12418 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 21 mm | 108021 | ||
T-12420 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 22 mm | 108022 | ||
T-12422 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 23 mm | 108023 | ||
T-12424 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 24 mm | 108024 | ||
T-12426 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 25 mm | 108025 | ||
T-12428 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 26 mm | 108026 | ||
T-12430 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 27 mm | 108027 | ||
T-12432 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 28 mm | 108028 | ||
T-12434 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 29 mm | 108029 | ||
T-12436 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 30 mm | 108030 | ||
T-12438 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 31 mm | 108031 | ||
T-12440 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 32 mm | 108032 | ||
T-12442 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 33 mm | 108033 | ||
T-12444 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 34 mm | 108034 | ||
T-12446 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 35 mm | 108035 | ||
T-12448 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 36 mm | 108036 | ||
T-12450 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 37 mm | 108037 | ||
T-12452 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 38 mm | 108038 | ||
T-12454 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 39 mm | 108039 | ||
T-12456 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 40 mm | 108040 | ||
T-12458 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 41 mm | 108041 | ||
T-12460 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 42 mm | 108042 | ||
T-12462 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 43 mm | 108043 | ||
T-12464 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 44 mm | 108044 | ||
T-12466 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 45 mm | 108045 | ||
T-12468 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 46 mm | 108046 | ||
T-12470 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 47 mm | 108047 | ||
T-12474 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 49 mm | 108049 | ||
T-12476 | Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 50 mm | 108050 |
doneScrew the core drill onto the holder.
Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels. Thread M18 x 6 P1.5
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-12472
SKU manufacturer:
108048
GTIN Code (EAN):
4007140008091
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 48 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
- Core drill with hard metal cutting edges and threaded holder. Ø 48 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread holder such as Fein
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Screw the core drill onto the holder.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
48,0 mm
Schneiden:
Hartmetall
Schnitttiefe:
50,0 mm
Für Aufnahmehalter:
MK2 / MK3
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
MK
Schaftdurchmesser Zoll / MK:
2 / 3
Nettogewicht:
0,305 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-58%
Taper and deburring countersinker DIN 335 type C 90° HSS, ground
102102
5,34 €
12,86 € MSRP
-63%
Twist drill DIN 1896 TL 3000 HSS ground extra long, with split point
254095
23,53 €
63,15 € MSRP
-59%
Twist drill DIN 338 type VA HSSE Co 5 TiAlN
215035F
1,55 €
3,77 € MSRP
-53%
Twist drill DIN 340 type N HSS-G
203040B
1,51 €
3,24 € MSRP
-60%
Screw-hole punch with three-point cutting tip
109230
15,50 €
38,91 € MSRP
-63%
Tungsten carbide multigrade hole saw MHS Ø 32 mm
113032
53,40 €
143,07 € MSRP
-61%
Hand tap UNC DIN 352 HSS, taper tap, ground 7/16”
246716UNC1
5,34 €
13,66 € MSRP
-64%
HSS Co 8 bi-metal hole saw, with fine toothing Ø 114 mm
126114
28,70 €
79,62 € MSRP
-59%
Hollow section twist drill works standard type N HSS ground
257571
3,35 €
8,24 € MSRP
-63%
Twist drill DIN 338 TL 3000 HSS TiAlN
258095F
7,35 €
19,66 € MSRP
-55%
Percussion drill with carbide cutting edge and straight shank ISO 5468 - DIN 8039
209100
2,90 €
6,51 € MSRP
-65%
Set of HSS Co 8 bi-metal hole saws in plastic cases
126306
84,75 €
239,24 € MSRP
-63%
HSS bi-metal hole saw, with varied toothing Ø 52 mm
106052
7,13 €
19,07 € MSRP
-67%
Core drill HSS with weldon shank (3/4”). Ø 32 mm
1082032
85,37 €
257,02 € MSRP
-54%
Twist drill set in steel case HSS R
A205210
6,64 €
14,58 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill with tungsten-carbide cutting edges and threaded retainer. Ø 48 mm 108048
Ø 48 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 102 / 108 103 / 108 104 / 108 105 or a threaded retainer such as the Fein KBM 542 / KBM 65.
4007140008091-60
4007140008091
https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-threaded-retainer-o-48-mm-108048-t-12472-4007140008091.html?dc=GB&cu=EUR
2024-09-22
76.09
DE
14