Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm 108719 Thumbnail

Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm 108719

-70%

Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm 108719

Sku: T-13243

45,04 € (excl. legal VAT, excl. Shipping)

148,82 € MSRP

In stock,
ready for shipping within 48h

Product variants

Sku:	Name:	SKU manufacturer:
T-13229	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm	108712
T-13231	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 13 mm	108713
T-13233	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 14 mm	108714
T-13235	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 15 mm	108715
T-13237	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 16 mm	108716
T-13239	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 17 mm	108717
T-13241	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 18 mm	108718
T-13245	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 20 mm	108720
T-13247	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 21 mm	108721
T-13249	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 22 mm	108722
T-13251	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 23 mm	108723
T-13253	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 24 mm	108724
T-13255	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 25 mm	108725
T-13257	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 26 mm	108726
T-13259	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 27 mm	108727
T-13261	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 28 mm	108728
T-13263	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 29 mm	108729
T-13265	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 30 mm	108730
T-13267	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 31 mm	108731
T-13269	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 32 mm	108732
T-13271	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 33 mm	108733
T-13273	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 34 mm	108734
T-13275	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 35 mm	108735
T-13277	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 36 mm	108736
T-13279	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 37 mm	108737
T-13281	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 38 mm	108738
T-13283	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 39 mm	108739
T-13285	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 40 mm	108740
T-13287	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 41 mm	108741
T-13289	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 42 mm	108742
T-13291	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 43 mm	108743
T-13293	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 44 mm	108744
T-13295	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 45 mm	108745
T-13297	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 46 mm	108746
T-13299	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 47 mm	108747
T-13301	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 48 mm	108748
T-13303	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 49 mm	108749
T-13305	Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 50 mm	108750

Insert guide pin into core drill.

Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels.

Content:

1 Piece

Shipping:

The shipping costs for United Kingdom could not be calculated automatically.

Provider:

Sales and delivery by ToolTeam®

Payment methods:

PayPal, Pay upon Invoice, Credit Card, Bank Prepayment, Bank Debit

Returns:

Consumers can return the item at the specified conditions: More details

Security:

Protected by the ToolTeam Buyer Protection: More details

Product data

Manufacturer:

Ruko GmbH

Condition:

NEW

Sku:

T-13243

SKU manufacturer:

108719

GTIN Code (EAN):

4007140068620

Weight:

0,00 Kg

All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

Ø 19 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 drill.

Core drill with hard metal cutting edges and Weldon shank 3/4”. Ø 19 mm
Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 302 / 108 303
the RUKO EasyLock no. 108 312 / 108 313 or with
They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy consumption and less wear result in a long service life.
With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
Insert the guide pin into the core drill.
Push the core drill into the holder and tighten the hexagon socket screws.
Make sure the core drill is properly seated in the holder.
With the EasyLock quick-release holder, the core drill is automatically locked.
Drill to size immediately, no need for punching or pre-drilling.
The cutting geometry of the core drill enables rapid chip removal upwards.
The spring-loaded guide pin helps to release the cut-out pieces.
Observe the speed table and use coolant.

Additional information

Diameter:

19,0 mm

Schneiden:

Hartmetall

Schnitttiefe:

50,0 mm

Maschine:

RS10 / RS20 / RS25e / RS30e / RS40e

Ø Weldonschaft:

19mm (3/4")

Schaftdurchmesser mm (2):

19,00

Schaftdurchmesser mm/Zoll/MK Maßeinheit:

Schaftdurchmesser Zoll / MK:

3/4

Nettogewicht:

0,11 kg

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

Ruko main catalogue precision tools

324 Pages (PDF)
Commercial customer offer**

RUKO catalogue Core drilling technology

52 Pages (PDF)
Commercial customer offer**

RUKO oil change program

20 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-69%

Ejector pin for core drills TC with weldon shank

Core drill Tecrona coated with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm

Ejector pin for core drills HSS with weldon shank

Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point

Hand deburrer DIN 335 type C 90°

Slotted taper and deburring countersinker 90° HSS

Tube and sheet drill bits HSS 1/4”, CBN ground with split point

Combined machine tap bit ”long” M 3 HSS-TiN

T-shank style jig-saw blade 8033 HSS bimetal

7-piece set of machine taps HSS type C 35°

EasyLock with thread M 14 and interior cooling

Taper and deburring countersinker-bit-set 90° HSS-TiN

Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)

Unigrat countersinker F 30

107034

27,77 €

70,42 € MSRP

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm 108719 Ø 19 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 drill. 4007140068620-60 4007140068620 https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-weldon-shank-3-4-o-19-mm-108719-t-13243-4007140068620?dc=GB&cu=EUR 2024-11-19 45.04 DE 14

Last searches

Frequent searches

All categories

Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm 108719

Product variants

Product data

Product description

Additional information

Related results

Complete catalogs

Matching catalog

Product suggestions