zoom_in
zoom_out
fullscreen
-70%
Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 42 mm 108742
Sku: T-13289
68,15 € (excl. legal VAT, excl. Shipping)
227,82 € MSRP
In stock,ready for shipping within 48h
Product variants
Sku: | Name: | SKU manufacturer: | ||
---|---|---|---|---|
T-13229 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 12 mm | 108712 | ||
T-13231 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 13 mm | 108713 | ||
T-13233 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 14 mm | 108714 | ||
T-13235 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 15 mm | 108715 | ||
T-13237 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 16 mm | 108716 | ||
T-13239 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 17 mm | 108717 | ||
T-13241 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 18 mm | 108718 | ||
T-13243 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 19 mm | 108719 | ||
T-13245 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 20 mm | 108720 | ||
T-13247 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 21 mm | 108721 | ||
T-13249 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 22 mm | 108722 | ||
T-13251 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 23 mm | 108723 | ||
T-13253 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 24 mm | 108724 | ||
T-13255 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 25 mm | 108725 | ||
T-13257 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 26 mm | 108726 | ||
T-13259 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 27 mm | 108727 | ||
T-13261 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 28 mm | 108728 | ||
T-13263 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 29 mm | 108729 | ||
T-13265 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 30 mm | 108730 | ||
T-13267 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 31 mm | 108731 | ||
T-13269 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 32 mm | 108732 | ||
T-13271 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 33 mm | 108733 | ||
T-13273 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 34 mm | 108734 | ||
T-13275 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 35 mm | 108735 | ||
T-13277 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 36 mm | 108736 | ||
T-13279 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 37 mm | 108737 | ||
T-13281 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 38 mm | 108738 | ||
T-13283 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 39 mm | 108739 | ||
T-13285 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 40 mm | 108740 | ||
T-13287 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 41 mm | 108741 | ||
T-13291 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 43 mm | 108743 | ||
T-13293 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 44 mm | 108744 | ||
T-13295 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 45 mm | 108745 | ||
T-13297 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 46 mm | 108746 | ||
T-13299 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 47 mm | 108747 | ||
T-13301 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 48 mm | 108748 | ||
T-13303 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 49 mm | 108749 | ||
T-13305 | Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 50 mm | 108750 |
doneInsert guide pin into core drill.
Core drill with carbide cutting edges. Particularly for railway tracks, Hardox / Weldox 400 steels, steel, cast steel, high-chromium alloyed steels such as V2A and V4A and higher alloyed steels.
Content:
1 Piece
Shipping:
The shipping costs for United Kingdom could not be calculated automatically.
Provider:
Sales and delivery by ToolTeam®
Payment methods:
Returns:
Security:
Product data
Manufacturer:
Ruko GmbH
Condition:
NEW
Sku:
T-13289
SKU manufacturer:
108742
GTIN Code (EAN):
4007140068859
Weight:
0,00 Kg
All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved.
This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.
Product description
Ø 42 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 drill.
- Core drill with hard metal cutting edges and Weldon shank 3/4”. Ø 42 mm
- Can be used in all column and magnetic stand drilling machines with Morse taper in conjunction with RUKO holder no. 108 302 / 108 303
- the RUKO EasyLock no. 108 312 / 108 313 or with
- They have a drilling time up to 10 times shorter than with twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
- With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
- Insert the guide pin into the core drill.
- Push the core drill into the holder and tighten the hexagon socket screws.
- Make sure the core drill is properly seated in the holder.
- With the EasyLock quick-release holder, the core drill is automatically locked.
- Drill to size immediately, no need for punching or pre-drilling.
- The cutting geometry of the core drill enables rapid chip removal upwards.
- The spring-loaded guide pin helps to release the cut-out pieces.
- Observe the speed table and use coolant.
Additional information
Diameter:
42,0 mm
Schneiden:
Hartmetall
Schnitttiefe:
50,0 mm
Maschine:
RS10 / RS20 / RS25e / RS30e / RS40e
Ø Weldonschaft:
19mm (3/4")
Schaftdurchmesser mm (2):
19,00
Schaftdurchmesser mm/Zoll/MK Maßeinheit:
mm
Schaftdurchmesser Zoll / MK:
3/4
Nettogewicht:
0,225 kg
Related results
Complete catalogs
The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.
Matching catalog
Commercial customer offer**
Product suggestions
-12%
Twist drill DIN 338 type N HSS rolled
201035
0,51 €
-60%
SDS-plus hammer drills TC5X
213120
11,05 €
27,48 € MSRP
-64%
Twist drill DIN 338 TL 3000 HSS TiAlN
258150F
17,13 €
47,18 € MSRP
-60%
Taper and deburring countersinker DIN 335 type C 90° HSS, ground
102121
13,02 €
32,48 € MSRP
-66%
Twist drills DIN 338 HSS Co 5 ground type N with reduced shank
2005125
9,24 €
27,56 € MSRP
-69%
21-piece set of hand taps M DIN 352 HSS Co 5
245001ERO
71,13 €
229,29 € MSRP
-63%
Twist drills DIN 345 type N HSS Co 5 TiN ground
204210T
39,96 €
107,94 € MSRP
-64%
HSS Co 8 bi-metal hole saw, with fine toothing Ø 140 mm
126140
41,97 €
116,85 € MSRP
-61%
Twist drill DIN 338 type N HSSG-TC 4.0
815040
7,39 €
19,07 € MSRP
-62%
Round dies UNF DIN EN 22568 HSS Nr. 3
240030UNF
10,38 €
27,30 € MSRP
-61%
Taper and deburring countersinker DIN 334 type D 60° HSS
102211
37,47 €
95,29 € MSRP
-58%
Twist drill set DIN 338 type UNI HSSE Co 5 ground in plastic case (ABS)
228214RO
80,21 €
190,67 € MSRP
-65%
Twist drill DIN 338 type VA HSSE Co 5
215111
5,59 €
16,18 € MSRP
-63%
Jobber length DIN 338 TL 3000 HSS-TiN ground, with split point.
258822T
7,77 €
20,83 € MSRP
-58%
Twist drill DIN 338 type N HSS G TiN
250094T
2,82 €
6,76 € MSRP
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
Ruko Core drill with tungsten-carbide cutting edges and weldon shank (3/4”). Ø 42 mm 108742
Ø 42 mm. Cutting depth: 50 mm - Core drills with tungsten carbide cutters. ; Particularly for rail tracks, Hardox / Weldox 400 steel, steel, cast iron, high-alloyed chromium steel such as stainless and acidresistant steel.; Considerably improved cutting behaviour was attained by research into the cutting geometry, which has a beneficial effect on cutting performance and drill life.; For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303 / 108 315 / 108 316, with RUKO EasyLock no. 108 312 / 108 313 / 108 314 or a weldon direct shank such as the RUKO magnetic-stand RS10 drill.
4007140068859-60
4007140068859
https://www.toolteam.com/en-GB/ruko-core-drill-with-tungsten-carbide-cutting-edges-and-weldon-shank-3-4-o-42-mm-108742-t-13289-4007140068859.html?dc=GB&cu=EUR
2024-09-23
68.15
DE
14