Ruko Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm 10815275 Thumbnail

Ruko Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm 10815275

-70%

Ruko Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm 10815275

Sku: T-12744

40,84 € (excl. legal VAT, excl. Shipping)

134,79 € MSRP

In stock,
ready for shipping within 48h

Product variants

Sku:	Name:	SKU manufacturer:
T-12725	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 19 mm	1081519
T-12727	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 20 mm	1081520
T-12729	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 21 mm	1081521
T-12731	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 22 mm	1081522
T-12733	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 23 mm	1081523
T-12735	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 24 mm	1081524
T-12737	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 25 mm	1081525
T-12739	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 26 mm	1081526
T-12740	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 26,5 mm	10815265
T-12743	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27 mm	1081527
T-12747	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 28 mm	1081528
T-12749	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 29 mm	1081529
T-12751	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 30 mm	1081530
T-12753	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 31 mm	1081531
T-12755	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 32 mm	1081532
T-12757	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 33 mm	1081533
T-12759	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 34 mm	1081534
T-12761	Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 36 mm	1081536

Insert guide pin into core drill.

Core drill made of high-performance high-speed steel. Suitable for steel (such as T-beams, large-format sheets), cast steel, non-ferrous and light metals.

Content:

1 Piece

Shipping:

The shipping costs for United Kingdom could not be calculated automatically.

Provider:

Sales and delivery by ToolTeam®

Payment methods:

PayPal, Pay upon Invoice, Credit Card, Bank Prepayment, Bank Debit

Returns:

Consumers can return the item at the specified conditions: More details

Security:

Protected by the ToolTeam Buyer Protection: More details

Product data

Manufacturer:

Ruko GmbH

Condition:

NEW

Sku:

T-12744

SKU manufacturer:

10815275

GTIN Code (EAN):

4007140136800

Weight:

0,00 Kg

All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

Ø 27,5 mm. Cutting depth: 30 mm - Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible.

Core drill with hard metal cutting edges and Weldon shank 3/4” for railway tracks. Ø 27.5 mm
Can be used on all rail drilling machines. The cutting geometry has been optimized especially for heavy-duty machining of railway tracks, making it economical to use.
They have a drilling time that is up to 10 times shorter than twist drills. Core drills only machine the tooth width, the drill core is ejected. Lower energy requirements and less wear result in a long service life.
With twist drills, the entire drill diameter must be machined. This requires a lot of force and a high drive power.
Insert the guide pin into the core drill.
Push the core drill into the holder and tighten the hexagon socket screws.
Make sure the core drill is properly seated in the holder.
With the EasyLock quick-release holder, the core drill is automatically locked.
Drill to size immediately, no need for punching or pre-drilling.
The cutting geometry of the core drill enables rapid chip removal upwards.
The spring-loaded guide pin helps to release the cut-out pieces.
Observe the speed table and use coolant.

Additional information

Diameter:

27,5 mm

Schnittrichtung:

rechtsschneidend

Werkstoff:

Schaft:

Weldonschaft

Schneiden:

Hartmetall

Schnitttiefe:

30,0 mm

Maschine:

RS5e / RS10 / RS20 / RS25e / RS30e / RS40e

Ø Weldonschaft:

19mm (3/4")

Beschichtung:

Unbeschichtet

Breite (mm):

32 mm

Hauptanwendung:

Stahl 1100 N/mm²

Länge (mm):

32 mm

Nebenanwendung:

Stahl 1300 N/mm²

Schaftdurchmesser mm (2):

19,00

Schaftdurchmesser mm/Zoll/MK Maßeinheit:

Schaftdurchmesser Zoll / MK:

3/4

Nettogewicht:

0,1 kg

Schaftdurchmesser:

19,00 mm

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

Ruko main catalogue precision tools

324 Pages (PDF)
Commercial customer offer**

RUKO catalogue Core drilling technology

52 Pages (PDF)
Commercial customer offer**

RUKO oil change program

20 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-60%

Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point

Combined machine tap bit ”long” M 3 HSS-TiN

Hand deburrer DIN 335 type C 90°

Tube and sheet drill-set HSS-TiN, ground in plastic case (ABS)

7-piece set of machine taps HSS type C 35°

Unigrat countersinker F 30

Slotted taper and deburring countersinker 90° HSS

Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)

T-shank style jig-saw blade 8033 HSS bimetal

Tube and sheet drill bits HSS 1/4”, CBN ground with split point

EasyLock with thread M 14 and interior cooling

Taper and deburring countersinker-bit-set 90° HSS-TiN

PowerGRIP plier wrenches, 300 mm

TB 13 Plus MK II bench drill with adjustable drill table

212503

2.734,79 €

3.278,78 € MSRP

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews Ruko Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm 10815275 Ø 27,5 mm. Cutting depth: 30 mm - Can be used on all track drilling machines. The cutting geometry has been specially optimized for heavy duty chip removal from railway tracks, thus makes efficient use possible. 4007140136800-60 4007140136800 https://www.toolteam.com/en-GB/ruko-core-drills-with-tungsten-carbide-cutting-edges-and-weldon-shank-for-railway-tracks-o-27-5-mm-10815275-t-12744-4007140136800?dc=GB&cu=EUR 2024-11-19 40.84 DE 14

Last searches

Frequent searches

All categories

Ruko Core drills with tungsten-carbide cutting edges and Weldon shank for railway tracks. Ø 27,5 mm 10815275

Product variants

Product data

Product description

Additional information

Related results

Complete catalogs

Matching catalog

Product suggestions