Ruko Countersink ULTIMATECUT DIN 335C 90° D.16,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO 102779EP Thumbnail

Ruko Countersink ULTIMATECUT DIN 335C 90° D.16,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO 102779EP

-61%

Ruko Countersink ULTIMATECUT DIN 335C 90° D.16,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO 102779EP

Sku: T-267631

26,60 € (excl. legal VAT, excl. Shipping)

67,44 € MSRP

In stock,
ready for shipping within 48h

Product variants

Sku:	Name:	SKU manufacturer:
T-267611	Countersink ULTIMATECUT DIN 335C 90° D.6,3mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102767EP
T-267615	Countersink ULTIMATECUT DIN 335C 90deg D.8,3mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102771EP
T-267619	Countersink ULTIMATECUT DIN 335C 90° D.10,4mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102774EP
T-267623	Countersink ULTIMATECUT DIN 335C 90deg D.12,4mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102776EP
T-267627	Countersink ULTIMATECUT DIN 335C 90degree D.15mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102778EP
T-267635	Countersink ULTIMATECUT DIN 335C 90degree D.19mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102780EP
T-267639	Countersink ULTIMATECUT DIN 335C 90° D.20,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102781EP
T-267643	Countersink ULTIMATECUT DIN 335C 90degree D.23mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102782EP
T-267647	Countersink ULTIMATECUT DIN 335C 90deg D.25mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102783EP
T-267651	Countersink ULTIMATECUT DIN 335C 90degree D.31mm HSSE-Co 5 RUnaTEC Z.3 RUKO	102785EP

Diameter: 16.5 mm
Schaftdurchmesser mm (2): 10,00

Schaftdurchmesser mm/Zoll/MK Maßeinheit: mm
Nettogewicht: 0,036 kg

Achieves the best performance in almost all materials and applications, significantly less feed force required. Up to 60% longer tool life, up to 30% faster countersinking, extremely smooth running, optimal countersink pattern, ideal chip removal. Extremely high wear resistance and hot hardness, suitable for normal and high-performance machining. No material welding, optimal and smooth surface, extremely high nano-hardness. The completely newly developed cutting geometry of the ULTIMATECUT from RUKO enormously reduces the axial and radial forces that act on the tool during the countersinking process. The specially developed, variable relief grinding ensures a very smooth countersinking process. This creates an exact, round and chatter-free surface of the countersink and thus guarantees the best results. Specially developed chip space parameters, such as the rake angle, transition radius and the extra-wide chip groove ensure optimal chip and heat removal and thus enable very high wear resistance. In addition, the new geometry counteracts material welding and reduces the countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without losing any of the quality of the countersinking result. The ULTIMATECUT achieves the best performance in almost all materials and applications.

Content:

1 Piece

Shipping:

The shipping costs for United Kingdom could not be calculated automatically.

Provider:

Sales and delivery by ToolTeam®

Payment methods:

PayPal, Pay upon Invoice, Credit Card, Bank Prepayment, Bank Debit

Returns:

Consumers can return the item at the specified conditions: More details

Security:

Protected by the ToolTeam Buyer Protection: More details

Product data

Manufacturer:

Ruko GmbH

Condition:

NEW

Sku:

T-267631

SKU manufacturer:

102779EP

GTIN Code (EAN):

4007140375728

Weight:

0,00 Kg

All information relating to products from Ruko GmbH. Technical and optical modifications of the manufacturer and errors reserved. This page has been machine-translated, the original german version can be found here, please also note the Translation Disclaimer.

Product description

The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO enormously reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. In addition, the new geometry counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Other technical features: - Feed rate in steel up to 800 N: 0.2 mm/rev

The completely newly developed cutting geometry of the ULTIMATECUT from RUKO greatly reduces the axial and radial forces that act on the tool during the countersinking process. The specially developed, variable relief grinding ensures a very smooth countersinking process. This creates an exact, round and chatter-free surface of the countersink and thus guarantees the best results. Specially developed chip space parameters, such as the rake angle, transition radius and the extra-wide chip groove ensure optimal chip and heat dissipation and thus enable very high wear resistance. In addition, the new geometry counteracts material welding and reduces the countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without losing any quality in the countersinking result. The ULTIMATECUT achieves the best performance in almost all materials and applications.
Diameter 16.5 mm, total length 60.0 mm
Coating: RUnaTEC
Nominal Ø: 16.5 mm
Small Ø: 3.2 mm
Shaft Ø: 10 mm
Total length: 60 mm
Cutting direction: right-hand cutting
Shaft design: three-face shank
Type: ULTIMATECUT
Brand: RUKO
Countersink angle: 90 °
Number of cutting edges: 3
Standard: DIN 335 C
Cutting material: HSSE-Co 5

Additional information

Diameter:

16.5 mm

Schaftdurchmesser mm (2):

10,00

Schaftdurchmesser mm/Zoll/MK Maßeinheit:

Nettogewicht:

0,036 kg

Complete catalogs

The offer is aimed exclusively at business customers, companies, public institutions, tradesmen and freelancers. All prices in catalogues are exclusive of VAT, shipping costs and surcharges if applicable.
The manufacturer is exclusively responsible for the content, price and article details of the products and offers presented in the catalogues. Subject to technical and optical changes by the manufacturer and errors excepted.

Ruko main catalogue precision tools

324 Pages (PDF)
Commercial customer offer**

RUKO catalogue Core drilling technology

52 Pages (PDF)
Commercial customer offer**

RUKO oil change program

20 Pages (PDF)
Commercial customer offer**

Matching catalog

Commercial customer offer**

Product suggestions

-61%

ULTIMATECUT countersink set HSS-E 6.3mm - 25.0mm 5 pcs, Rose

Countersink set DIN 335 90° ULTIMATECUT 6.3-20.5mm HSSE-Co 5 RUnaTEC 6 pcs.

ULTIMATECUT Three flute end mill HSSE 90°, C, 6,3mm,cyl

Countersink set DIN 335 90 degree ULTIMATECUT 6.3-25.0mm HSSE-Co 5 RUnaTEC 5 pcs.

ULTIMATECUT Three flute end mill HSS 90°, C, 6,3mm, cylindrical

ULTIMATECUT countersink HSS RUnaTEC, 90°, C, 6,3mm cyl

ULTIMATECUT countersink set HSS-E 6.3mm - 20.5mm, 6 pcs. rose

Twist drill DIN 340 TL 3000 HSS Co 5 ground, with split point

Hand deburrer DIN 335 type C 90°

7-piece set of machine taps HSS type C 35°

Slotted taper and deburring countersinker 90° HSS

T-shank style jig-saw blade 8033 HSS bimetal

Taper and deburring countersinker-bit-set 90° HSS-TiN

Twist drill set DIN 338 type N HSS G ground in plastic case (ABS)

214215LIRO

156,68 €

376,60 € MSRP

No Review yet

Description: No Review yet Written by: No Review Rating: 5 out of 5 5 stars, based on 1 reviews Ruko Countersink ULTIMATECUT DIN 335C 90° D.16,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO 102779EP The completely newly developed cutting edge geometry of the ULTIMATECUT from RUKO enormously reduces the axial and radial forces acting on the tool during the countersinking process. The specially developed, variable undercut ensures a very smooth countersinking process. This produces a precise, round and chatter-free countersink surface and therefore guarantees the best results. Specially developed chip space parameters, such as rake angle, transition radius and the extra wide flute, ensure optimum chip and heat removal and thus enable very high wear resistance. In addition, the new geometry counteracts material welding and reduces countersinking forces enormously. Significantly less feed force is now required during the countersinking process. Materials can be machined at either very high or low cutting speeds without any loss of countersinking quality. The ULTIMATECUT achieves the best performance in almost all materials and applications. Other technical features: - Feed rate in steel up to 800 N: 0.2 mm/rev 4007140375728-60 4007140375728 https://www.toolteam.com/en-GB/ruko-countersink-ultimatecut-din-335c-90-d-16-5mm-hsse-co-5-runatec-z-3-ruko-102779ep-t-267631-4007140375728?dc=GB&cu=EUR 2024-11-19 26.6 DE 14

Last searches

Frequent searches

All categories

Ruko Countersink ULTIMATECUT DIN 335C 90° D.16,5mm HSSE-Co 5 RUnaTEC Z.3 RUKO 102779EP

Product variants

Product data

Product description

Additional information

Related results

Complete catalogs

Matching catalog

Product suggestions