zoom_in
zoom_out
fullscreen
-24%
PCE thickness gauge PCE-CT 80HP-F5N3
UGS: T-910609
910,05 € (incl. Taxe 19%, hors Expédition)
764,75 € (excl. TVA légale, hors Expédition)
1.189,89 € PDSF
En stock,prêt à être expédié sous 48h
Product variants
| UGS: | Nom: | Fabricant UGS: | ||
|---|---|---|---|---|
|
T-910610 | Thickness Gauge PCE-CT 80HP-FN0D5 | PCE-CT 80HP-FN0D5 | |
|
T-910611 | Coating Thickness Gauge PCE-CT 80HP-FN1D5 | PCE-CT 80HP-FN1D5 | |
|
T-910612 | Thickness Gauge PCE-CT 80HP-FN2 | PCE-CT 80HP-FN2 | |
|
T-910613 | Thickness Gauge PCE-CT 80HP-FN2D5 | PCE-CT 80HP-FN2D5 | |
|
T-910614 | vehicle measuring device PCE-CT 80HP-FN3 | PCE-CT 80HP-FN3 |
doneMade in Germany
Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
Resolution: 0.1 µm (<100 µm), 1 µm (>100 µm
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
practical V-groove on the measuring heads
Resolution: 0.1 µm (<100 µm), 1 µm (>100 µm
Data memory for 2000 readings
Fe substrates such as: steel and iron
NFe substances such as: aluminum and copper
practical V-groove on the measuring heads
Contenu:
1 Pièce
Expédition:
Les frais d’expédition pour France n’ont pas pu être calculés automatiquement.
Fournisseur:
Vente et livraison par ToolTeam®
Méthodes de paiements:
Retour:
Sécurité:
Données du produit
Fabricant:
PCE Deutschland GmbH
Etat:
Nouveau
UGS:
T-910609
Fabricant UGS:
PCE-CT 80HP-F5N3
Code GTIN (EAN):
4250348730626
Poids:
0,27 Kg
Toutes les informations relatives aux produits de PCE Deutschland GmbH. Modifications techniques et optiques du fabricant et erreurs réservées.
Cette page a été traduite automatiquement, la version originale en allemand se trouve here, veuillez également noter le Exonérations de responsabilité en matière de traduction.
Description du produit
The coating thickness gauge can reliably determine the thickness of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 0 ... 5000 µm on ferrous metals, the coating thickness gauge covers a wide range of measuring tasks. Due to the accuracy of up to ±(1.0 % of Mw. + 0.5 µm), the coating thickness gauge is a very precise measuring instrument. The sensor of the coating thickness gauge has a V-groove. Thanks to this V-groove, it is possible to perform measurements on convex surfaces with the coating thickness gauge. In addition to convex surfaces, measurements can also be performed on concave surfaces with the coating thickness gauge.
During the measurements, the measured values can be stored on the coating thickness gauge. A memory of up to 2,000 measured values is available on the coating thickness gauge. After a measurement run, the measured values can be transferred from the coating thickness gauge to a computer using the software and analyzed. For further processing of the measured values, they can be exported in CSV format.
With the limit value alarm function on the coating thickness gauge, a target/actual range can be stored. If the test specimen is within the stored range on the coating thickness gauge, this is indicated by a green LED. If the measured value is outside the set range, this is signaled by a red LED from the coating thickness gauge. Due to the limit value alarm function, the coating thickness gauge is used, for example, in incoming and final inspection for quality assurance.
For special protection of the electronics, the housing of the coating thickness gauge is additionally rubberized. Optionally, the coating thickness gauge can be equipped with an ISO calibration certificate.
During the measurements, the measured values can be stored on the coating thickness gauge. A memory of up to 2,000 measured values is available on the coating thickness gauge. After a measurement run, the measured values can be transferred from the coating thickness gauge to a computer using the software and analyzed. For further processing of the measured values, they can be exported in CSV format.
With the limit value alarm function on the coating thickness gauge, a target/actual range can be stored. If the test specimen is within the stored range on the coating thickness gauge, this is indicated by a green LED. If the measured value is outside the set range, this is signaled by a red LED from the coating thickness gauge. Due to the limit value alarm function, the coating thickness gauge is used, for example, in incoming and final inspection for quality assurance.
For special protection of the electronics, the housing of the coating thickness gauge is additionally rubberized. Optionally, the coating thickness gauge can be equipped with an ISO calibration certificate.
Résultats associés
Catalogues complets
L’offre s’adresse exclusivement aux clients professionnels, entreprises, institutions publiques, commerçants et indépendants. Tous les prix dans les catalogues s’entendent hors TVA, frais de port et suppléments le cas échéant.
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Le fabricant est exclusivement responsable du contenu, des prix et des détails des articles et des offres présentés dans les catalogues. Sous réserve de modifications techniques et optiques du fabricant et sous réserve d’erreurs.
Catalogue correspondant
Offre client commercial**
Suggestions de produits
-23%
Coating Thickness Gauge PCE-CT 80-FN0D5 including standard sensor
PCE-CT 80-FN0D5
635,49 €
hors Expédition
823,35 € PDSF
hors Expédition
-23%
PCE-128/3 ISO flow cup
PCE-128/3
194,60 €
hors Expédition
252,15 € PDSF
hors Expédition
-23%
built-in display PCE-G 2
PCE-G 2
449,95 €
hors Expédition
582,99 € PDSF
hors Expédition
-24%
hardness tester PCE-5000
PCE-5000
5.376,15 €
hors Expédition
7.029,20 € PDSF
hors Expédition
-22%
pH tester PCE-PH 18
PCE-PH 18
74,05 €
hors Expédition
95,10 € PDSF
hors Expédition
-23%
PCE-PH 26F water analyzer | 1-3 point calibration | ATC | flat pH electrode | viscous liquids
PCE-PH 26F
207,49 €
hors Expédition
268,80 € PDSF
hors Expédition
-24%
Borescope PCE-IVE 320
PCE-IVE 320
1.038,39 €
hors Expédition
1.357,65 € PDSF
hors Expédition
-24%
Radiation Meter PCE-EM 30
PCE-EM 30
1.671,85 €
hors Expédition
2.185,90 € PDSF
hors Expédition
-24%
4-Kanal Vibrationsmessgerät PCE-VM 400B
PCE-VM 400B
4.546,10 €
hors Expédition
5.943,95 € PDSF
hors Expédition
-24%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
715,29 €
hors Expédition
935,20 € PDSF
hors Expédition
-24%
roughness tester PCE-RT 2200
PCE-RT 2200
1.976,75 €
hors Expédition
2.584,55 € PDSF
hors Expédition
-24%
display / built-in display PCE-BPD-U-41D
PCE-BPD-U-41D
1.048,40 €
hors Expédition
1.370,75 € PDSF
hors Expédition
-23%
Milliohmmeter PCE-MO 2001
PCE-MO 2001
363,60 €
hors Expédition
471,10 € PDSF
hors Expédition
-23%
Digitales Refraktometer PCE-DRF 8
PCE-DRF 8
268,10 €
hors Expédition
347,35 € PDSF
hors Expédition
-23%
gloss meter PCE-PGM 60
PCE-PGM 60
574,85 €
hors Expédition
744,80 € PDSF
hors Expédition
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE thickness gauge PCE-CT 80HP-F5N3
The coating thickness gauge can reliably determine the thickness of, for example, plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 0 ... 5000 µm on ferrous metals, the coating thickness gauge covers a wide range of measuring tasks. Due to the accuracy of up to ±(1.0 % of Mw. + 0.5 µm), the coating thickness gauge is a very precise measuring instrument. The sensor of the coating thickness gauge has a V-groove. Thanks to this V-groove, it is possible to perform measurements on convex surfaces with the coating thickness gauge. In addition to convex surfaces, measurements can also be performed on concave surfaces with the coating thickness gauge.
During the measurements, the measured values can be stored on the coating thickness gauge. A memory of up to 2,000 measured values is available on the coating thickness gauge. After a measurement run, the measured values can be transferred from the coating thickness gauge to a computer using the software and analyzed. For further processing of the measured values, they can be exported in CSV format.
With the limit value alarm function on the coating thickness gauge, a target/actual range can be stored. If the test specimen is within the stored range on the coating thickness gauge, this is indicated by a green LED. If the measured value is outside the set range, this is signaled by a red LED from the coating thickness gauge. Due to the limit value alarm function, the coating thickness gauge is used, for example, in incoming and final inspection for quality assurance.
For special protection of the electronics, the housing of the coating thickness gauge is additionally rubberized. Optionally, the coating thickness gauge can be equipped with an ISO calibration certificate. 4250348730626-4147 4250348730626 https://www.toolteam.com/fr-FR/pce-thickness-gauge-pce-ct-80hp-f5n3-t-910609-4250348730626?dc=FR&cu=EUR 2024-12-02 910.05 DE 14
During the measurements, the measured values can be stored on the coating thickness gauge. A memory of up to 2,000 measured values is available on the coating thickness gauge. After a measurement run, the measured values can be transferred from the coating thickness gauge to a computer using the software and analyzed. For further processing of the measured values, they can be exported in CSV format.
With the limit value alarm function on the coating thickness gauge, a target/actual range can be stored. If the test specimen is within the stored range on the coating thickness gauge, this is indicated by a green LED. If the measured value is outside the set range, this is signaled by a red LED from the coating thickness gauge. Due to the limit value alarm function, the coating thickness gauge is used, for example, in incoming and final inspection for quality assurance.
For special protection of the electronics, the housing of the coating thickness gauge is additionally rubberized. Optionally, the coating thickness gauge can be equipped with an ISO calibration certificate. 4250348730626-4147 4250348730626 https://www.toolteam.com/fr-FR/pce-thickness-gauge-pce-ct-80hp-f5n3-t-910609-4250348730626?dc=FR&cu=EUR 2024-12-02 910.05 DE 14