PCE-DPG 3 Pressure Sensor Water & Gases | 1.4” NPT thread connection| 2.5” large display| Response time < 50 ms
Artikelnummer: T-909964
301,15 € (incl. 19% belasting, excl. verzending)
253,07 € (excl. wettelijke BTW, excl. verzending)
390,20 € Adviesprijs
In voorraad,klaar voor verzending
Inhoud:
1 Stuk
Verzenden:
De verzendkosten voor België konden niet automatisch worden berekend.
Aanbieder:
Verkoop en levering door ToolTeam®
Betalingsmethoden:
Retourneren:
Veiligheid:
Productgegevens
Fabrikant:
PCE Deutschland GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-909964
SKU fabrikant:
PCE-DPG 3
GTIN-code (EAN):
4250348721280
Gewicht:
0,30 Kg
Alle informatie met betrekking tot producten van PCE Deutschland GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
The PCE-DPG series pressure transducer is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure transducer is versatile. The current pressure is displayed by the pressure transducer as a value and simultaneously as a bar graph. As a further function, the pressure transducer offers a peak function. This function shows the operator the highest and lowest measured pressure at the pressure transducer by pressing a button.
Thanks to the large 2.5 display, almost all measured values can be read directly. Possible adjustable units for the pressure transducer would be Mpa, bar, Kpa, mH2o, kg/cm², psi, mmH2o, in.WC and mbar. The response time of the pressure transducer is <50 ms. The connection of the pressure transducer to the process is realized via a 1/4” NPT connection. Typical applications are e.g. suction control, leak test or pressure monitoring. ”
Thanks to the large 2.5 display, almost all measured values can be read directly. Possible adjustable units for the pressure transducer would be Mpa, bar, Kpa, mH2o, kg/cm², psi, mmH2o, in.WC and mbar. The response time of the pressure transducer is <50 ms. The connection of the pressure transducer to the process is realized via a 1/4” NPT connection. Typical applications are e.g. suction control, leak test or pressure monitoring. ”
Gerelateerde resultaten
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Productsuggesties
-24%
crane scale PCE-CSI 12
PCE-CSI 12
1.588,10 €
excl. verzending
2.076,45 € Adviesprijs
excl. verzending
-23%
ammeter PCE-DC 50
PCE-DC 50
211,15 €
excl. verzending
273,59 € Adviesprijs
excl. verzending
-23%
pH tester PCE-PH 23
PCE-PH 23
235,05 €
excl. verzending
304,50 € Adviesprijs
excl. verzending
-24%
Coating Thickness Gauge PCE-CT 80HP-FN1D5
PCE-CT 80HP-FN1D5
873,65 €
excl. verzending
1.142,29 € Adviesprijs
excl. verzending
-23%
PCE-DPG 6 pressure indicator water & gases | 1.4” NPT thread connection|2.5” large display| Response time < 50 ms
PCE-DPG 6
301,15 €
excl. verzending
390,20 € Adviesprijs
excl. verzending
-24%
PCE-EVSE-KIT2 EVSE measuring device for checking fixed installation. Charging stations/wall boxes, variety of functions
PCE-EVSE-KIT2
1.206,75 €
excl. verzending
1.577,80 € Adviesprijs
excl. verzending
-23%
PCE-PH 26F water analyzer | 1-3 point calibration | ATC | flat pH electrode | viscous liquids
PCE-PH 26F
201,05 €
excl. verzending
260,49 € Adviesprijs
excl. verzending
-24%
display / built-in display PCE-BPD-U-41D
PCE-BPD-U-41D
1.042,00 €
excl. verzending
1.362,45 € Adviesprijs
excl. verzending
-23%
PCE-PHM 14 aquarium pH meter 0 ... 50 °C; < 80 % RH|0 ... 14 pH|Res. 0.01 pH|sampling rate approx. 1 sec.
PCE-PHM 14
179,00 €
excl. verzending
231,95 € Adviesprijs
excl. verzending
-23%
Class I Sound - Calibrator PCE-SC 09
PCE-SC 09
455,45 €
excl. verzending
590,10 € Adviesprijs
excl. verzending
-24%
ultrasonic flow meter PCE-TDS 75 for permanent installation
PCE-TDS 75
1.419,75 €
excl. verzending
1.856,29 € Adviesprijs
excl. verzending
-23%
Accelerometer PCE-VT 1100S
PCE-VT 1100S
261,65 €
excl. verzending
339,05 € Adviesprijs
excl. verzending
-23%
Wind Speed Meter / Wind Speed Sensor PCE-WS CR
PCE-WS CR
247,90 €
excl. verzending
321,19 € Adviesprijs
excl. verzending
-24%
Radiation Meter PCE-EM 30
PCE-EM 30
1.665,45 €
excl. verzending
2.177,59 € Adviesprijs
excl. verzending
-22%
pH tester PCE-PH 18
PCE-PH 18
74,05 €
excl. verzending
95,10 € Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-DPG 3 Pressure Sensor Water & Gases | 1.4” NPT thread connection| 2.5” large display| Response time < 50 ms
The PCE-DPG series pressure transducer is well suited for monitoring and displaying air pressure and water pressure. Thanks to its high measuring resolution and high accuracy, this pressure transducer is versatile. The current pressure is displayed by the pressure transducer as a value and simultaneously as a bar graph. As a further function, the pressure transducer offers a peak function. This function shows the operator the highest and lowest measured pressure at the pressure transducer by pressing a button.
Thanks to the large 2.5 display, almost all measured values can be read directly. Possible adjustable units for the pressure transducer would be Mpa, bar, Kpa, mH2o, kg/cm², psi, mmH2o, in.WC and mbar. The response time of the pressure transducer is <50 ms. The connection of the pressure transducer to the process is realized via a 1/4” NPT connection. Typical applications are e.g. suction control, leak test or pressure monitoring. ” 4250348721280-4147 4250348721280 https://www.toolteam.com/nl-BE/pce-dpg-3-pressure-sensor-water-gases-1-4-npt-thread-connection-2-5-large-display-response-time-50-ms-t-909964-4250348721280?dc=BE&cu=EUR 2024-11-25 301.15 DE 14
Thanks to the large 2.5 display, almost all measured values can be read directly. Possible adjustable units for the pressure transducer would be Mpa, bar, Kpa, mH2o, kg/cm², psi, mmH2o, in.WC and mbar. The response time of the pressure transducer is <50 ms. The connection of the pressure transducer to the process is realized via a 1/4” NPT connection. Typical applications are e.g. suction control, leak test or pressure monitoring. ” 4250348721280-4147 4250348721280 https://www.toolteam.com/nl-BE/pce-dpg-3-pressure-sensor-water-gases-1-4-npt-thread-connection-2-5-large-display-response-time-50-ms-t-909964-4250348721280?dc=BE&cu=EUR 2024-11-25 301.15 DE 14