PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
Artikelnummer: T-909996
391,19 € (incl. 19% belasting, excl. verzending)
328,73 € (excl. wettelijke BTW, excl. verzending)
506,80 € Adviesprijs
In voorraad,klaar voor verzending
Inhoud:
1 Stuk
Verzenden:
De verzendkosten voor België konden niet automatisch worden berekend.
Aanbieder:
Verkoop en levering door ToolTeam®
Betalingsmethoden:
Retourneren:
Veiligheid:
Productgegevens
Fabrikant:
PCE Deutschland GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-909996
SKU fabrikant:
PCE-EVSE 300
GTIN-code (EAN):
4250348727541
Gewicht:
1,00 Kg
Alle informatie met betrekking tot producten van PCE Deutschland GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators.
Hinweise zur Batterieentsorgung:
Da in unseren Sendungen Batterien und Akkus enthalten sein können, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:
- Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet.
- Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und können verwertet werden.
- Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen oder in unserem Lager) unentgeltlich zurückgeben.
- Die Abgabe in Verkaufsstellen ist dabei für Endnutzer auf die übliche Mengen sowie solche Altbatterien beschränkt, die der Vertreiber als Neubatterien in seinem Sortiment führt oder geführt hat.
- Das Zeichen mit der durchgekreuzten Mülltonne bedeutet, dass Sie Batterien und Akkus nicht im Hausmüll entsorgen dürfen
Unter diesen Zeichen finden Sie zusätzlich nachstehende Symbole mit folgender Bedeutung:
- Pb = Batterie enthält mehr als 0,004 Masseprozent Blei
- Cd = Batterie enthält mehr als 0,002 Masseprozent Cadmium
- Hg = Batterie enthält mehr als 0,0005 Masseprozent Quecksilber
Gerelateerde resultaten
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Productsuggesties
-23%
Borescope PCE-VE 200-S
PCE-VE 200-S
495,89 €
excl. verzending
642,49 € Adviesprijs
excl. verzending
-24%
display / built-in display PCE-BPD-U-41A
PCE-BPD-U-41A
1.042,00 €
excl. verzending
1.362,45 € Adviesprijs
excl. verzending
-23%
Class I Sound - Calibrator PCE-SC 09
PCE-SC 09
455,45 €
excl. verzending
590,10 € Adviesprijs
excl. verzending
-24%
borescope PCE-RS 27
PCE-RS 27
1.000,15 €
excl. verzending
1.307,69 € Adviesprijs
excl. verzending
-24%
PCE-430-EKIT sound level meter 22 - 136 db(A) 3 Hz - 20 kHz octave filter 8 Hz-16kHz accuracy class 1
PCE-430-EKIT
4.537,89 €
excl. verzending
5.933,20 € Adviesprijs
excl. verzending
-24%
ultrasonic flow meter PCE-TDS 75 for permanent installation
PCE-TDS 75
1.419,75 €
excl. verzending
1.856,29 € Adviesprijs
excl. verzending
-24%
PCE-MFM 2400 | High-precision magnetic field analyzer with an accuracy of 1% | Tesla and Gauss measurement
PCE-MFM 2400
709,80 €
excl. verzending
928,10 € Adviesprijs
excl. verzending
-23%
digital scale PCE-EP 150P2
PCE-EP 150P2
366,39 €
excl. verzending
474,69 € Adviesprijs
excl. verzending
-23%
ammeter PCE-DC 50
PCE-DC 50
211,15 €
excl. verzending
273,59 € Adviesprijs
excl. verzending
-23%
work safety measuring device PCE-LMD 5
PCE-LMD 5
137,69 €
excl. verzending
178,39 € Adviesprijs
excl. verzending
-23%
crane scale PCE-CS 1000N
PCE-CS 1000N
183,60 €
excl. verzending
237,89 € Adviesprijs
excl. verzending
-24%
Borescope PCE-IVE 320
PCE-IVE 320
1.032,00 €
excl. verzending
1.349,35 € Adviesprijs
excl. verzending
-24%
Thickness Gauge PCE-CT 80HP-FN0D5
PCE-CT 80HP-FN0D5
900,95 €
excl. verzending
1.177,99 € Adviesprijs
excl. verzending
-21%
PCE-HT 50 hygrometer plus external temperature sensor -50...100 °C | air -20 ... 60 °C | 20 ... 99% RH
PCE-HT 50
31,70 €
excl. verzending
40,35 € Adviesprijs
excl. verzending
-23%
Milliohmmeter PCE-MO 2001
PCE-MO 2001
357,19 €
excl. verzending
462,79 € Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-EVSE 300 EVSE Adapter | Test adapter for charging station | wall box | connector type 1 + 2 | CP and PP simulation
Electromobility is playing an increasingly important role. An important point here are the charging stations of electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently installed charging stations, also known as wallboxes. Often there are already measuring devices to perform the required measurements. Therefore, an adapter is needed so that the measuring device can be connected to the charging station.
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. 4250348727541-4147 4250348727541 https://www.toolteam.com/nl-BE/pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=BE&cu=EUR 2024-11-25 391.19 DE 14
The EVSE adapter / test adapter for charging stations is specially designed for this application and already brings a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE adapter. This allows the charging station to be checked for insulation with the help of the EVSE adapter. The EVSE adapter has an earthed plug connection. The RCD tester can thus be used to check the residual current device A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces.
Via the CP line (Control Pilot), the electric vehicle communicates with the charging station and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station / charging pole. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the EVSE adapter is equipped with appropriate simulators. 4250348727541-4147 4250348727541 https://www.toolteam.com/nl-BE/pce-evse-300-evse-adapter-test-adapter-for-charging-station-wall-box-connector-type-1-2-cp-and-pp-simulation-t-909996-4250348727541?dc=BE&cu=EUR 2024-11-25 391.19 DE 14