PCE FI / RCD tester PCE-RCD 1 | Instant evaluation with display color | EN 61010-1 CAT III 600V | 10 mA to 650 mA
Artikelnummer: T-910198
159,70 € (incl. 19% belasting, excl. verzending)
134,20 € (excl. wettelijke BTW, excl. verzending)
206,95 € Adviesprijs
In voorraad,klaar voor verzending
Inhoud:
1 Stuk
Verzenden:
De verzendkosten voor België konden niet automatisch worden berekend.
Aanbieder:
Verkoop en levering door ToolTeam®
Betalingsmethoden:
Retourneren:
Veiligheid:
Productgegevens
Fabrikant:
PCE Deutschland GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-910198
SKU fabrikant:
PCE-RCD 1
GTIN-code (EAN):
4250348710642
Gewicht:
1,04 Kg
Alle informatie met betrekking tot producten van PCE Deutschland GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
This VDE tester determines the tripping current and tripping time of RCDs. The different selectable test currents allow a very flexible use of this VDE tester. Every house installation contains residual current devices. These interrupt the power supply as soon as a residual current occurs. VDE testers allow a residual current to flow and determine at which residual current the residual current circuit breaker reacts. Furthermore, the time of the reaction is also measured. These two parameters, tripping current and tripping time, are the safety-relevant parameters of an RCD.
The operation of this VDE tester is very simple. In addition to the maximum test current, you can set the type of RCD (normal or selective) and also whether the tripping current or the tripping time should be measured. Furthermore, you can select whether the test current should start with a positive or negative half-wave. If all settings are made, the measurement starts with one keystroke. With the display color, the VDE tester immediately gives a good/bad evaluation. You can read the measured value on the large LCD display. If the input voltage is too high or if there is no grounding, as well as if the ground potential is higher than 50 V, the VDE Tester will give a warning signal.
The operation of this VDE tester is very simple. In addition to the maximum test current, you can set the type of RCD (normal or selective) and also whether the tripping current or the tripping time should be measured. Furthermore, you can select whether the test current should start with a positive or negative half-wave. If all settings are made, the measurement starts with one keystroke. With the display color, the VDE tester immediately gives a good/bad evaluation. You can read the measured value on the large LCD display. If the input voltage is too high or if there is no grounding, as well as if the ground potential is higher than 50 V, the VDE Tester will give a warning signal.
Hinweise zur Batterieentsorgung:
Da in unseren Sendungen Batterien und Akkus enthalten sein können, sind wir nach dem Batteriegesetz (BattG) verpflichtet, Sie auf Folgendes hinzuweisen:
- Batterien und Akkus dürfen nicht im Hausmüll entsorgt werden, sondern Sie sind zur Rückgabe gebrauchter Batterien und Akkus gesetzlich verpflichtet.
- Altbatterien können Schadstoffe enthalten, die bei nicht sachgemäßer Lagerung oder Entsorgung die Umwelt oder Ihre Gesundheit schädigen können. Batterien enthalten aber auch wichtige Rohstoffe wie z.B. Eisen, Zink, Mangan oder Nickel und können verwertet werden.
- Sie können die Batterien nach Gebrauch entweder an uns zurücksenden oder in unmittelbarer Nähe (z.B. im Handel oder in kommunalen Sammelstellen oder in unserem Lager) unentgeltlich zurückgeben.
- Die Abgabe in Verkaufsstellen ist dabei für Endnutzer auf die übliche Mengen sowie solche Altbatterien beschränkt, die der Vertreiber als Neubatterien in seinem Sortiment führt oder geführt hat.
- Das Zeichen mit der durchgekreuzten Mülltonne bedeutet, dass Sie Batterien und Akkus nicht im Hausmüll entsorgen dürfen
Unter diesen Zeichen finden Sie zusätzlich nachstehende Symbole mit folgender Bedeutung:
- Pb = Batterie enthält mehr als 0,004 Masseprozent Blei
- Cd = Batterie enthält mehr als 0,002 Masseprozent Cadmium
- Hg = Batterie enthält mehr als 0,0005 Masseprozent Quecksilber
Gerelateerde resultaten
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Productsuggesties
-21%
PCE-HT 50 hygrometer plus external temperature sensor -50...100 °C | air -20 ... 60 °C | 20 ... 99% RH
PCE-HT 50
31,70 €
excl. verzending
40,35 € Adviesprijs
excl. verzending
-24%
Industry - Endoscope PCE-VE 1036HR-F
PCE-VE 1036HR-F
2.878,69 €
excl. verzending
3.763,85 € Adviesprijs
excl. verzending
-23%
pH tester PCE-PH 23
PCE-PH 23
235,05 €
excl. verzending
304,50 € Adviesprijs
excl. verzending
-23%
digital thermometer PCE-895
PCE-895
606,10 €
excl. verzending
785,29 € Adviesprijs
excl. verzending
-24%
thickness gauge PCE-CT 80HP-F5N3
PCE-CT 80HP-F5N3
909,15 €
excl. verzending
1.188,69 € Adviesprijs
excl. verzending
-24%
PCE-MFM 2400 | High-precision magnetic field analyzer with an accuracy of 1% | Tesla and Gauss measurement
PCE-MFM 2400
709,80 €
excl. verzending
928,10 € Adviesprijs
excl. verzending
-24%
PCE-EVSE-KIT2 EVSE measuring device for checking fixed installation. Charging stations/wall boxes, variety of functions
PCE-EVSE-KIT2
1.206,75 €
excl. verzending
1.577,80 € Adviesprijs
excl. verzending
-23%
PCE-PHM 14 aquarium pH meter 0 ... 50 °C; < 80 % RH|0 ... 14 pH|Res. 0.01 pH|sampling rate approx. 1 sec.
PCE-PHM 14
179,00 €
excl. verzending
231,95 € Adviesprijs
excl. verzending
-23%
moisture meter PCE-780
PCE-780
137,69 €
excl. verzending
178,39 € Adviesprijs
excl. verzending
-30%
tachometer PCE-T236
PCE-T236
124,10 €
excl. verzending
177,19 € Adviesprijs
excl. verzending
-23%
system scale PCE-TB 6C
PCE-TB 6C
454,55 €
excl. verzending
588,95 € Adviesprijs
excl. verzending
-24%
crane scale PCE-CSI 12
PCE-CSI 12
1.588,10 €
excl. verzending
2.076,45 € Adviesprijs
excl. verzending
-23%
crane scale PCE-CS 1000N
PCE-CS 1000N
183,60 €
excl. verzending
237,89 € Adviesprijs
excl. verzending
-23%
occupational health and safety measuring device PCE-GA 10
PCE-GA 10
171,65 €
excl. verzending
222,40 € Adviesprijs
excl. verzending
-24%
PCE-900 Leeb hardness tester for metals |200 ... 900 HL|± 0.8% at HLD=900 |HL |HRC|HRB|HB|HV|HSD
PCE-900
708,90 €
excl. verzending
926,89 € Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE FI / RCD tester PCE-RCD 1 | Instant evaluation with display color | EN 61010-1 CAT III 600V | 10 mA to 650 mA
This VDE tester determines the tripping current and tripping time of RCDs. The different selectable test currents allow a very flexible use of this VDE tester. Every house installation contains residual current devices. These interrupt the power supply as soon as a residual current occurs. VDE testers allow a residual current to flow and determine at which residual current the residual current circuit breaker reacts. Furthermore, the time of the reaction is also measured. These two parameters, tripping current and tripping time, are the safety-relevant parameters of an RCD.
The operation of this VDE tester is very simple. In addition to the maximum test current, you can set the type of RCD (normal or selective) and also whether the tripping current or the tripping time should be measured. Furthermore, you can select whether the test current should start with a positive or negative half-wave. If all settings are made, the measurement starts with one keystroke. With the display color, the VDE tester immediately gives a good/bad evaluation. You can read the measured value on the large LCD display. If the input voltage is too high or if there is no grounding, as well as if the ground potential is higher than 50 V, the VDE Tester will give a warning signal. 4250348710642-4147 4250348710642 https://www.toolteam.com/nl-BE/pce-fi-rcd-tester-pce-rcd-1-instant-evaluation-with-display-color-en-61010-1-cat-iii-600v-10-ma-to-650-ma-t-910198-4250348710642?dc=BE&cu=EUR 2024-11-25 159.7 DE 14
The operation of this VDE tester is very simple. In addition to the maximum test current, you can set the type of RCD (normal or selective) and also whether the tripping current or the tripping time should be measured. Furthermore, you can select whether the test current should start with a positive or negative half-wave. If all settings are made, the measurement starts with one keystroke. With the display color, the VDE tester immediately gives a good/bad evaluation. You can read the measured value on the large LCD display. If the input voltage is too high or if there is no grounding, as well as if the ground potential is higher than 50 V, the VDE Tester will give a warning signal. 4250348710642-4147 4250348710642 https://www.toolteam.com/nl-BE/pce-fi-rcd-tester-pce-rcd-1-instant-evaluation-with-display-color-en-61010-1-cat-iii-600v-10-ma-to-650-ma-t-910198-4250348710642?dc=BE&cu=EUR 2024-11-25 159.7 DE 14