zoom_in
zoom_out
fullscreen
PCE-DFG N 50K force gauge + external S load cell for tensile and compressive force | Resolution 0.005 kN / 5 N
Artikelnummer: T-909940
Artikel uit de handel
doneMade in Germany
Dynamometer PCE-DFG N 50K
with external S load cell
USB interface
PC software
with external S load cell
USB interface
PC software
Productgegevens
Fabrikant:
PCE Deutschland GmbH
Voorwaarde:
Nieuw
Artikelnummer:
T-909940
SKU fabrikant:
PCE-DFG N 50K
GTIN-code (EAN):
4250348722942
Gewicht:
2,94 Kg
Alle informatie met betrekking tot producten van PCE Deutschland GmbH. Technische en optische wijzigingen van de fabrikant en fouten voorbehouden.
Deze pagina is machinaal vertaald, de originele duitse versie kunt u vinden op here, let ook op de Vertaling Disclaimer.
Productomschrijving
The dynamometer measures both tensile and compressive forces with very high resolution. The tensile force or compressive force is often required in test laboratories, e.g. to determine yield strengths or breakaway forces. The dynamometer is supplied with an external measuring cell. The measuring cell is connected to the dynamometer by an approx. 6 m long sensor cable. The dynamometer or load cell has an M20 threaded receptacle to introduce the tensile or compressive forces.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value.
When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value.
When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine.
Gerelateerde resultaten
Volledige catalogi
Het aanbod is uitsluitend gericht op zakelijke klanten, bedrijven, openbare instellingen, handelaars en freelancers. Alle prijzen in de catalogi zijn exclusief BTW, verzendkosten en eventuele toeslagen.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
De fabrikant is exclusief verantwoordelijk voor de inhoud, prijs en artikeldetails van de producten en aanbiedingen in de catalogi. Technische en optische wijzigingen door de fabrikant en fouten voorbehouden.
Bijpassende catalogus
Commercieel klantenaanbod**
Productsuggesties
-24%
PCE-MA 100 moisture meter (abs.) | 110 g | readability 1 mg/0.001 g | heating chamber for moisture determination and much more.
PCE-MA 100
1.046,55 €
excl. verzending
1.368,39 € Adviesprijs
excl. verzending
-24%
PCE-MA 200 moisture analyzer MB 0..100% | +40.. +199 °C | 200 g | heating time 1-199 min. | readability 0.01%
PCE-MA 200
1.119,39 €
excl. verzending
1.463,59 € Adviesprijs
excl. verzending
-23%
built-in display PCE-G 2
PCE-G 2
449,95 €
excl. verzending
582,99 € Adviesprijs
excl. verzending
-24%
hardness tester PCE-5000
PCE-5000
5.376,15 €
excl. verzending
7.029,20 € Adviesprijs
excl. verzending
-23%
Industry - Stethoscope PCE-S 42
PCE-S 42
409,55 €
excl. verzending
530,60 € Adviesprijs
excl. verzending
-23%
Digitales Refraktometer PCE-DRF 8
PCE-DRF 8
268,10 €
excl. verzending
347,35 € Adviesprijs
excl. verzending
-23%
occupational health and safety measuring device PCE-GA 10
PCE-GA 10
178,10 €
excl. verzending
230,75 € Adviesprijs
excl. verzending
-24%
Thickness Gauge PCE-CT 80HP-FN0D5
PCE-CT 80HP-FN0D5
905,50 €
excl. verzending
1.183,95 € Adviesprijs
excl. verzending
-24%
ultrasonic flow meter PCE-TDS 75 for permanent installation
PCE-TDS 75
1.426,10 €
excl. verzending
1.864,60 € Adviesprijs
excl. verzending
-24%
Radiation Meter PCE-EM 30
PCE-EM 30
1.671,85 €
excl. verzending
2.185,90 € Adviesprijs
excl. verzending
-23%
digital scale PCE-EP 30P2
PCE-EP 30P2
372,80 €
excl. verzending
483,00 € Adviesprijs
excl. verzending
-23%
Borescope PCE-VE 200-S
PCE-VE 200-S
501,40 €
excl. verzending
649,60 € Adviesprijs
excl. verzending
-24%
display / built-in display PCE-BPD-U-41D
PCE-BPD-U-41D
1.048,40 €
excl. verzending
1.370,75 € Adviesprijs
excl. verzending
-21%
Programmier-Adapter PCE-PD14
PCE-PD14
65,35 €
excl. verzending
83,19 € Adviesprijs
excl. verzending
-21%
PCE-HT 50 hygrometer plus external temperature sensor -50...100 °C | air -20 ... 60 °C | 20 ... 99% RH
PCE-HT 50
31,70 €
excl. verzending
40,35 € Adviesprijs
excl. verzending
No Review yet
Description: No Review yet
Written by: No Review
Rating: 5 out of 5
5 stars, based on 1
reviews
PCE-DFG N 50K force gauge + external S load cell for tensile and compressive force | Resolution 0.005 kN / 5 N
The dynamometer measures both tensile and compressive forces with very high resolution. The tensile force or compressive force is often required in test laboratories, e.g. to determine yield strengths or breakaway forces. The dynamometer is supplied with an external measuring cell. The measuring cell is connected to the dynamometer by an approx. 6 m long sensor cable. The dynamometer or load cell has an M20 threaded receptacle to introduce the tensile or compressive forces.
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value.
When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine. 4250348722942-1 4250348722942 https://www.toolteam.com/nl-NL/pce-dfg-n-50k-force-gauge-external-s-load-cell-for-tensile-and-compressive-force-resolution-0-005-kn-5-n-t-909940-4250348722942?dc=NL&cu=EUR 2024-12-02 1088.45 DE 14
The dynamometer can operate with a sampling rate of up to 1600 Hz. The sampled measured values are displayed directly in the dynamometer as an instantaneous value, as well as in a graphical measurement curve. The measurements can be stored in the internal memory or transferred via USB interface with the included software with a maximum of 800 Hz as a live measurement. The dynamometer has a graphic LCD that displays the measured values numerically and also graphically. Furthermore, the dynamometer is protected according to IP54 and can therefore also be used in harsh industrial environments. The dynamometer offers the possibility to store two limit values, which are continuously compared with the instantaneous value.
When these limit values are exceeded or undershot, a signal is given in the dynamometer’s display, as well as a reaction via external interfaces that can be used, for example, to control a testing machine. 4250348722942-1 4250348722942 https://www.toolteam.com/nl-NL/pce-dfg-n-50k-force-gauge-external-s-load-cell-for-tensile-and-compressive-force-resolution-0-005-kn-5-n-t-909940-4250348722942?dc=NL&cu=EUR 2024-12-02 1088.45 DE 14